Dud Carts are getting to me now.

[Super-Shiny]

I am sick of them, it seems out of a pack of five Boge & Smoketech pre-punched carts they are dud and it is now starting to drive me mad.

I have done the condom method
I have done it drip by drip until nice and soaked
I have left them to settle for 1 hour

I have done all kinda ways and still two out of five will have a burnt taste

Does anyone know of a really good cart even if it aint pre-punched as i am willing to go back to just using carts instead of Tank+Cart just to get a nice tasting cart for once

Seen a few people saying that the Kangers are nice, I can understand 1 out of 5 carts being dud, But 2 out of 5 from each pack is a bit annoying, especially when you have to order more and the p+p thrown in comes too quite a bit.

I was looking at dual coil carts as i have never tried them (Cannot find pre-punched ones with large holes or even 2 small holes that are in-stock anywhere) but that does no matter as i am willing to drop the Tank system and just have a cart, don't care if a Cart on it's own looks silly on a Vamo

Any recommendations would be lovely as i am at my last tether, i just wanna relax and have a nice tasting vape in the comfort of my armchair not sitting there thinking "Omg this tastes awfull"

Juice i use is 70pg/30vg on my Vamo set on 8 watts.

Help!!

[Skwoddy]

Kanger bottom coil carts are great I found, grab a a carto punch or cheaper still use a junior hacksaw to cut a slot in them ( doesn't contort the cartos surface)

--------
Baz

[Deleted]

hi romlee
if you would care to pm me i have a carto punch i no longer use, so you can buy ordinary carto's and screw them into the punch and a slight tap with a hammer and bingo one hole in the correct place.
yours if you want it
the punch has a couple of washers so you dont punch too far through so fairly fool proof

[Super-Shiny]

Many thanks collowobbles for that kind offer but i think i am gonna drop the tank and just go for a plain and simple carto (funny thing is i started with a carto and loved them on their own and tried Viva's/AGA-T+/Kanger Clearo/Boge Cart in a tank and now wanna go back to just Cart)



Ok it might look funny just a cart on a vamo (shame they don't do a cone like the one that comes with the Riva 1100) to make it look better but i just am seeking flavor/vape/TH and most of all hassle free.



Just watched this video to what i think his talking about the Kanger (he just mentions bottom coil cart, does not mention a brand name):



Do you know anyone who makes longer ones as they seem quite small in length, also what resistance do you think for the Vamo...LR or Standard.



Regards



Romelee

[Neil from Valley Vapes]

dct prepunched with two holes in stock here lastcig.co.uk/cartomizers-tanks/dct-replacement-coilcartomizer i use them myself and they are very good never had problems with them.

[greendollar]

+ 1 Skwoddy

I've been using Kanger LR Horizontal Coil carts from VE for months now and never had a dud , I see Vapingthings are doing them for a fiver a pack with free pp

or

www.vapingthings.com/KANGER_XL_BOTTOM-COIL_CARTOMISERS_-_5_PK/p1311952_8795841.aspx

[Sandra (aka Chillax)]

Innokin are the ones I use and never had a single dud but boge I had pack after pack of them.

[Davy Tee]

Feb 8, 2013 17:08:49 GMT Sandra (aka Chillax) said:

Innokin are the ones I use and never had a single dud but boge I had pack after pack of them.

Where do you get them from Sandra need a reliable vendor recommended please

[Super-Shiny]

I just spoke to someone @ Vapingthings (Very nice person) and am gonna place a order for the Kanger Bottom Coil.

I will be using them on a Vamo so what resistance do you think i should get 1.8 too 2.3 or 2.4 too 2.8 or shall i get the XXL version: www.vapingthings.com/KANGER_XL_BOTTOM-COIL_CARTOMISERS_-_5_PK/p1311952_8795841.aspx but they only come in 2.4 too 2.8 resistance.

So basically what works best, LR - SR or XL-SR Kanger, what would you choose for my Vammy

Sorry if this is going on to long i just wanna get it right as this is starting to cost more than smoking

[Sandra (aka Chillax)]

Feb 8, 2013 17:32:16 GMT Davy Tee said:

Feb 8, 2013 17:08:49 GMT Sandra (aka Chillax) said:

Innokin are the ones I use and never had a single dud but boge I had pack after pack of them.

Where do you get them from Sandra need a reliable vendor recommended please

Here but out of stock at the moment

And here www.vapingthings.com/INNOKIN_510_CARTOMISERS/p1311952_8006840.aspx

And here
www.vapeescape.co.uk/innokin%2D510%2Dcartomisers%2D%285%29%2Dempty%7E14

[Sandra (aka Chillax)]

Feb 8, 2013 17:32:45 GMT Super-Shiny said:

I just spoke to someone @ Vapingthings (Very nice person) and am gonna place a order for the Kanger Bottom Coil.

I will be using them on a Vamo so what resistance do you think i should get 1.8 too 2.3 or 2.4 too 2.8 or shall i get the XXL version: www.vapingthings.com/KANGER_XL_BOTTOM-COIL_CARTOMISERS_-_5_PK/p1311952_8795841.aspx but they only come in 2.4 too 2.8 resistance.

So basically what works best, LR - SR or XL-SR Kanger, what would you choose for my Vammy

Sorry if this is going on to long i just wanna get it right as this is starting to cost more than smoking

All will work nice on the Vamo that's the beauty of the device.

[Deleted]

why not ask for a mixture as a pack to try and see which you like best worth a try

[Super-Shiny]

I vape on my Vamo @ 8 watts or 4.5 volts and according to this chart: www.e-cigarette-forum.com/forum/tutorials/260292-selecting-cartomizers-match-your-battery-temperature-preferences-excel.html


Once the voltage range, minP, maxP and cartomizer/atomizer resistance
values have been selected you are ready to read the chart. To begin I
have a battery with a 3.2 volt output. The range applicable to me is
within the column directly below the 3.25 volt value. Red cells mean you
are vaping to hot and yellow cells mean you are vaping to cold(we
establised these borders with min and max P). In order for me to vape at
the highest power level I select the green cell with the highest
value(7.04w). If I liked a colder vape I might have selected the 4.8w
green cell. Now all I do is look to the left of the green cell I
selected and find the resistance value. In my case a 1.5ohm carto is
needed to match my battery and vapor preference(warmest).




I would be looking @ 2.8 resistance so gonna go for 2.4 too 2.8: www.vapingthings.com/KANGER_BOTTOM-COIL_CARTOMISERS_LOWSTANDARD_RES_-_5_PK/p1311952_7121055.aspx

See how that goes

[Deleted]

Have you considered an Echomiser? They sell them at vapeescape. I use them and they are cheap and awesome.

[Super-Shiny]

Feb 8, 2013 18:47:56 GMT @mp2012 said:

Have you considered an Echomiser? They sell them at vapeescape. I use them and they are cheap and awesome.

Will see how the Kangers go first before i spend anymore money, i suppose like everything in life is trial and error.

I will keep pursuing the perfect vape for myself, just gotta find it and find it i will