ego vv spinner and 2.4ohm mini nova

[readey04]

hi

i just got a ego vv spinner and just wanted to know what the best vault setting i should use on my 2.4 ohm Viv mini nova ?

[djs]

For a 2.4, I'd start around 3.8. Try it on the lowest setting and see how you go.

i.i.r.c. mostly I have 1.8s just under the 3.8 marking.

[OneDay]

The best setting is the one that tastes best for you, that's the beauty of variable voltage devices. Personally I'd run a 2.4 head at 4.3 or 4.4 volts, but it also depends on the juice.
Start at 3.something and slowly crank it up until your juice starts to taste a bit burned, then wind it back a tad. That should be your 'sweet spot'

[readey04]

ok that sounds like a good plan i will give it a go a have never used a vv device before and my battery packed in so i thought i would give one a go but didn't want to wreak my atty on my first go

do you now if you can use standard ce4's on them to ?

[djs]

Jun 13, 2013 22:05:25 GMT readey04 said:

ok that sounds like a good plan i will give it a go a have never used a vv device before and my battery packed in so i thought i would give one a go but didn't want to wreak my atty on my first go

do you now if you can use standard ce4's on them to ?

Yes...I've used a lot of CE and Spinner combo.

[padiho]

Jun 13, 2013 22:05:25 GMT readey04 said:

ok that sounds like a good plan i will give it a go a have never used a vv device before and my battery packed in so i thought i would give one a go but didn't want to wreak my atty on my first go

do you now if you can use standard ce4's on them to ?

That's all I use on my spinner, usually roundabout 4.3 but of course depends on the juice. Oneday has it spot on. A spinner and a bauway ce 4 ....just heaven