Would these work in the Nemesis?

[-V-]

Someone over on FT said they would, they look kinda different to the ones I saw on Tod's video

Anyone know if these would be ok for the Nemesis?


www.ebay.com/itm/Pack-25-Neodymium-ring-magnets-10mm-outer-dia-x-8mm-inner-dia-x-2mm-N35-grade-/130650106647?pt=UK_Collectables_WeirdStuff_RL&hash=item1e6b5a6b17

[stu1873]

I don't think they will work mate.

My genuine nemesis magnets are 17 outside dia. 10mm hole and 1mm thick.

[-V-]

On this Thread on FT they say they work:
www.fasttech.com/forums/1448300/t/1068929/uk-switch-magnets/last

These ones:
www.guysmagnets.com/view-product/19-mm-x-14-mm-x-1-mm-neodymium-ring

[stu1873]

I have ordered 2 of these vapermorphs. I should have them by tuesday or wednesday next week so will let you know if they work or not.

[stu1873]

I received these magnets today and although they are a looser fit on the switch's post than the Genuine Atmomixani magnets, once you have screwed the switch together you will not see any difference to the genuine one's.

They are working a treat in my clones switch and i will be ordering some more for my other Nemesis clones i have on order.

Also i have found that my switches throw with either set of magnets is quite short for my liking but if i put the nylon washer that comes with the genuine magnets in between the battery and the switch it gives me a better longer throw. The magnets i received today doesn't come with a suitable washer so i am ordering some more from ebay to sort out my forthcoming Nemesis clones switches. The genuine Atmomaxani nylon washer is approx 18.5mm OD x 12mm ID x 1.5mm thick.

Hope this info help you guys get the magnetic switch sorted on you're Nemesis clones

[-V-]

Thanks mate, I will get a few on order...

[Pezz]

Think I'll have to try a few of those myself.

[blakey]

Oct 30, 2013 10:03:56 GMT Pezz said:

Think I'll have to try a few of those myself.

Yep, I have a few inbound too. I got 25 of them for £11.11 delivered

[Pezz]

Well mine arrived yesterday.

A doddle to fit and even though you can tell they are not made to measure they work fine.

I did find with the spring the button sometimes gets a bit crunchy (Worth noting now that my nemesis is not genuine) and it is smoother with the magnets.

On the downside the spring I have is really soft and with the magnets now installed I'm finding it takes a bit more effort to fire.

[markm]

I found the button starting to crunch is a sign the bottom pin is loose.
I snugged it up with my needle nosed pliers and it's not done it since.
I think it's the longer throw allowing the spring coils to ride over each other,
Once held in permanent tension they can't move around.

[chrisjw]

Is that for 1 magnet or a pair on guys magnets?

[Pezz]

Nov 6, 2013 14:20:51 GMT markm said:

I found the button starting to crunch is a sign the bottom pin is loose.
I snugged it up with my needle nosed pliers and it's not done it since.
I think it's the longer throw allowing the spring coils to ride over each other,
Once held in permanent tension they can't move around.

Maybe it's the way I put my batteries in and out but I do find the bottom pin coming loose quite often - I just finger tighten it back down so maybe having a go at it with some pliers will get it tighter.

[markm]

Nov 6, 2013 17:35:34 GMT Pezz said:

Nov 6, 2013 14:20:51 GMT markm said:

I found the button starting to crunch is a sign the bottom pin is loose.
I snugged it up with my needle nosed pliers and it's not done it since.
I think it's the longer throw allowing the spring coils to ride over each other,
Once held in permanent tension they can't move around.

Maybe it's the way I put my batteries in and out but I do find the bottom pin coming loose quite often - I just finger tighten it back down so maybe having a go at it with some pliers will get it tighter.

Be gentle with it, getting it tight by pressing on to top with a finger just wont get it
tight enough to lock, so just give it a mm or two more with the pliers as it gives me the impression
of being quite soft and easily damaged 

[Dan]

Does anyone have a link to the nylon washers please?

Have already ordered a pair of magnets from here

Thankyou!!