mybad
Super Member
Joined:November 2012
Posts: 1,652
Location:
Likes: 619
Recent Posts
Last Online Feb 1, 2024 23:18:05 GMT
|
Post by mybad on Aug 27, 2014 18:12:47 GMT
seen how much there going for now sure its 80-90 quid, hope they wear masks Surprise Surprise, NOT. its dinky yes but not worth the increase in price ,Total rip off.
|
|
hijack
Super Member
Squeaky Butt Cheeks
Joined:May 2014
Posts: 1,705
Location:
Likes: 1,259
Recent Posts
Last Online Sept 29, 2015 16:59:47 GMT
|
Post by hijack on Aug 27, 2014 21:14:47 GMT
try screwing the ego adapter on to the 510 1st and then screw the mow on till its finger tight i found that if your unlucky the ego adapter crushes the bottom of the coil head causing a short (dont over tighten it) did them magnets turn up Thanks decoy will try that, No magnets as yet mate using a rubber washer for now. Did you just scratch the annodise off were the 510 seats ? Which magnets do you need Grandad I have around 10 of the countersunk and various others for batteries. If you PM me what your missing, ill send to you.
|
|
decoy
Super Member
Joined:February 2014
Posts: 4,119
Location:
Likes: 3,118
Recent Posts
Last Online Apr 1, 2023 20:12:03 GMT
|
Post by decoy on Aug 27, 2014 21:35:46 GMT
try screwing the ego adapter on to the 510 1st and then screw the mow on till its finger tight i found that if your unlucky the ego adapter crushes the bottom of the coil head causing a short (dont over tighten it) did them magnets turn up Thanks decoy will try that, No magnets as yet mate using a rubber washer for now. Did you just scratch the annodise off were the 510 seats ? Yeppers used a flat screwdriver ill check her in doors has posted em and get back to you
|
|
Grandad
Super Member
Joined:February 2014
Posts: 1,090
Location:
Likes: 1,025
Recent Posts
Last Online Dec 5, 2023 5:21:08 GMT
|
Post by Grandad on Aug 28, 2014 10:28:29 GMT
Thanks decoy will try that, No magnets as yet mate using a rubber washer for now. Did you just scratch the annodise off were the 510 seats ? Which magnets do you need Grandad I have around 10 of the countersunk and various others for batteries. If you PM me what your missing, ill send to you. Thanks hijack for offer but decoy has it covered but if a no go will drop you a pm. Its the 2mm magnet for the battery i have one but its 1mm :-( Cheers
|
|
decoy
Super Member
Joined:February 2014
Posts: 4,119
Location:
Likes: 3,118
Recent Posts
Last Online Apr 1, 2023 20:12:03 GMT
|
Post by decoy on Nov 28, 2014 8:11:19 GMT
just trying a heath robinson workaround while i wait for nature vape to send ot new magnet for switch and ordered a sprung loaded pin all ill say about nature vape is i ordered them last week and some 18500 batts off torchy on Monday i think and i got the batts yesterday still no sighn of nature vapes bits
remember the spring i fitted to the switch well it works it without the magnets ive used a thick plastic washer from a mechcano set instead of the magnet(broken) this is how i was using it till the parts came but ive since removed the batt magnet and added a second washer to the switch to hold the batt in place im using a short length of plastic water pipe (18mm ed)
omg why was it not made this way it seems to work the atty a lot better now will post up some pics and stuffs after some sleep oh and my new atty of coice is the mini fogger with a clapton coil
|
|
Grandad
Super Member
Joined:February 2014
Posts: 1,090
Location:
Likes: 1,025
Recent Posts
Last Online Dec 5, 2023 5:21:08 GMT
|
Post by Grandad on Dec 10, 2014 21:50:21 GMT
just trying a heath robinson workaround while i wait for nature vape to send ot new magnet for switch and ordered a sprung loaded pin all ill say about nature vape is i ordered them last week and some 18500 batts off torchy on Monday i think and i got the batts yesterday still no sighn of nature vapes bits remember the spring i fitted to the switch well it works it without the magnets ive used a thick plastic washer from a mechcano set instead of the magnet(broken) this is how i was using it till the parts came but ive since removed the batt magnet and added a second washer to the switch to hold the batt in place im using a short length of plastic water pipe (18mm ed) omg why was it not made this way it seems to work the atty a lot better now will post up some pics and stuffs after some sleep oh and my new atty of coice is the mini fogger with a clapton coil Hi decoy going to give the rc spring a try on my Gizmo this weekend not used it for a while its been playing up since i changed the switch to the short throw upgrade. Im picking up my mini fogger from the sorting office tomorrow any heads up on good builds for the mini fogger Mr Gizmo
|
|
decoy
Super Member
Joined:February 2014
Posts: 4,119
Location:
Likes: 3,118
Recent Posts
Last Online Apr 1, 2023 20:12:03 GMT
|
Post by decoy on Dec 10, 2014 22:07:48 GMT
just trying a heath robinson workaround while i wait for nature vape to send ot new magnet for switch and ordered a sprung loaded pin all ill say about nature vape is i ordered them last week and some 18500 batts off torchy on Monday i think and i got the batts yesterday still no sighn of nature vapes bits remember the spring i fitted to the switch well it works it without the magnets ive used a thick plastic washer from a mechcano set instead of the magnet(broken) this is how i was using it till the parts came but ive since removed the batt magnet and added a second washer to the switch to hold the batt in place im using a short length of plastic water pipe (18mm ed) omg why was it not made this way it seems to work the atty a lot better now will post up some pics and stuffs after some sleep oh and my new atty of coice is the mini fogger with a clapton coil Hi decoy going to give the rc spring a try on my Gizmo this weekend not used it for a while its been playing up since i changed the switch to the short throw upgrade. Im picking up my mini fogger from the sorting office tomorrow any heads up on good builds for the mini fogger Mr Gizmo will do a rehash of this thread when i gets some time to make it easyer to follow the main thing with the fogger is the wicking and getting just the right amount in to the channels(about 2mm) as for the coils ive had allsorts in it and it seems to like them all(running duel coils in both of mine now and loving them more than the rose dear i say) try taking out the magnets all together and using a washer on the switch and a suitable sized oring to hold the batt in place once you have used the rc spring (you may have to used a few washers on the switch to make it reach the batt top but its a quick easy mod to try) will put up wicking picks as soon as proboards let me in mr meatballs review
|
|
Grandad
Super Member
Joined:February 2014
Posts: 1,090
Location:
Likes: 1,025
Recent Posts
Last Online Dec 5, 2023 5:21:08 GMT
|
Post by Grandad on Dec 11, 2014 12:41:07 GMT
Thanks for that decoy Appreciated. You run dual coils in the mini fogger wow gonnna have a go at that and the Gizmo the weekend ????
|
|
jackcustard
Super Member
Big Brother is watching...
Joined:May 2014
Posts: 932
Location:
Likes: 558
Recent Posts
Last Online Nov 8, 2020 15:38:36 GMT
|
Post by jackcustard on Feb 21, 2015 18:10:06 GMT
I got the spring loaded firing pin, new lo pro button and new magnets today.
Seem to be getting misfires?
And with the new firing pin does anyone else find it tough to get their spheroid to sit right when fully screwed down? The slightest knock and it's not tight down anymore...
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Apr 28, 2024 14:03:53 GMT
|
Post by Deleted on Feb 21, 2015 18:28:18 GMT
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Apr 28, 2024 14:03:53 GMT
|
Post by Deleted on Feb 21, 2015 19:05:44 GMT
I got the spring loaded firing pin, new lo pro button and new magnets today. Seem to be getting misfires? And with the new firing pin does anyone else find it tough to get their spheroid to sit right when fully screwed down? The slightest knock and it's not tight down anymore... I got the lo pro button but had to use the old screw, I just don't get on with these gizmos. Tried all sorts to like it cos its very cute but I think it doesn't like me!
|
|
osdset
Senior Member
Joined:May 2014
Posts: 328
Location:
Likes: 257
Recent Posts
Last Online Mar 6, 2022 6:44:47 GMT
|
Post by osdset on Feb 22, 2015 5:08:16 GMT
little update found a good work around for the strange firing of the switch i used to race 1/10 scale rc cars and i had a spare spring from a shocker so i cut it down to fit in the switch and now it works every time with out the customary wiggle Gerber or Leatherman? My money is on Gerber, had mine for years and it's a trusty friend. Oh, and the device looks pretty cool by the way!
|
|
jackcustard
Super Member
Big Brother is watching...
Joined:May 2014
Posts: 932
Location:
Likes: 558
Recent Posts
Last Online Nov 8, 2020 15:38:36 GMT
|
Post by jackcustard on Feb 22, 2015 11:12:35 GMT
My dad swears by leatherman... I fixed the issue. Misfires turned into shorts last night I think this was caused by the positive insulator been too low in spheroid. Not new bits on gizmo . Changed bits on base over to the ones that pep provided with Spheroid and all is good now. Fingers crossed. Scary stuff when button sticka down.
|
|
decoy
Super Member
Joined:February 2014
Posts: 4,119
Location:
Likes: 3,118
Recent Posts
Last Online Apr 1, 2023 20:12:03 GMT
|
Post by decoy on Feb 22, 2015 17:40:30 GMT
osdset its a 15 year old gerber and its my baby lol @johanino ive got the mini erl and its a ruddy good atty but they have stopped making it because of skeets (jumped up fast tech forum member) i got a normal erl clone(with out adjustable center pin and its crap so try and find one with adjusting pin) and the mini conversion kit www.fasttech.com/products/1910104 is crap no other words for it www.fasttech.com/products/2016000 is the min convertion kit for the erl jackcustard hehehe have found away to get rid of all magnets just need to find a good spring to use (was using the spare one out of the kato but melted it lol)it takes alot of the faff out of using the mod and it seems to hit harder also cracked my second tank on the foggers so kinda stuck for now humph
|
|
jackcustard
Super Member
Big Brother is watching...
Joined:May 2014
Posts: 932
Location:
Likes: 558
Recent Posts
Last Online Nov 8, 2020 15:38:36 GMT
|
Post by jackcustard on Feb 22, 2015 18:04:47 GMT
Decoy you might have to do a picture guide for me?
Got the mini fogger wicking lovely at 1.3 ohms. Then it got floody but not leaky, yet. Its on edge cant quite decide whether it wants to leak.
A tiny bit more wick in the channels on next refil me thinks...
|
|