The YOUDE AGA-T3 Rebuildable Tank Atomiser is upsetting me

[The Vaper's Tongue]

I was really looking forward to this one, but I fear that getting it to work right is beyond me. The problem is...IT BURNS, and my poor old throat might never recover. 

This is quite a clever design and looks beautiful. No manual was supplied - please take note Exhale Cigarettes - but how hard could it be? Just a Genesis with a few tweaks? I thought I would try around 1.2 ohms using a ready-made coil and wicks. It burnt wick. I tried different wicks - ekowool, cotton, silicon, mesh. Everything burnt. I tried different coils - home made, NR-R-NR wire; every resistance from sub-ohm up to 2.5. Everything in every combination burnt wicks. Oh, did I mention that I tried several different juices and several different mods in every setting I could find? Guess what?

I now have it limping along on a 1.5 ohm coil and a slab of 3mm Ekowool fired on an old Vision Spinner at its lowest voltage. It takes a lot of sucking for a less than impressive whiff of vapour but at least it isn't burning my throat out. 

Okay, my old brain is getting mushy but I am sure I haven't missed anything obvious. So if anybody can suggest anything to get this old Vapyre smiling again, I would be ever so grateful...

[dreamylittledream]

Chuck it in the bin and try something more reliable?

Okay I'm not a huge fan of Gennys anyway but when it aint working, well sometimes it aint working

[macmagoo]

You are lucky you got some vaper. I just built an AGA T7 put some juice in it and it all came out of the airflow holes. Its not getting the better of me build two tomorrow night.

[The Vaper's Tongue]

My thanks to the respondents, but is either 'throw it away' or 'you should try my problems' the best suggestions that the mighty assemblage of brains on this board can come up with?

Anyone?