flavourtank
VENDOR Employee/Associate
Vape cloud Brighton :)
Joined:March 2013
Posts: 4,803
Location:
Likes: 2,786
Recent Posts
Last Online Jul 17, 2019 8:07:14 GMT
|
Post by flavourtank on Oct 15, 2014 20:48:42 GMT
hi
im in need of the following items
nic base approx. 100ml (until I can spend on larger amount) wire for coils (Marcus whats the 3176896734L your banging about?) or a decent grade what do you recommend? one shot concentrates i.e something like red Astaire or whatever is a good oneshot
ideally would like it to be cheap as poss
ive seen threads regarding these bits but would like recommendations from you fellows
everythingliquid can I come to your shop and purchase?
|
|
leo
Super Member
Joined:June 2014
Posts: 652
Location:
Likes: 447
Recent Posts
Last Online Jan 24, 2018 15:28:40 GMT
|
Post by leo on Oct 15, 2014 20:50:43 GMT
Get your wire from The Vape Mesh Co... good prices on Kanthal. Don't know where you are with your coil building, but the 317l used to be sold as GPlat (until someone on Reddit figured out the company selling G-Plat was ripping people off by repackaging SS welding wire), it's for very low ohm builds and is harder to use than regular Kanthal
I'd recommend starting out with some 0.3mm and some 0.45mm kanthal... much thicker and you can end up with very low ohms.
|
|
lairey
VENDOR Employee/Associate
Queen of Creams
Joined:November 2013
Posts: 6,731
Location:
Likes: 6,773
Recent Posts
Last Online Apr 16, 2018 21:12:38 GMT
|
Post by lairey on Oct 15, 2014 20:52:39 GMT
For one-shot concentrates, either Chef's Vapour's own or Pink Spot or Rebranded (all 3 available from Chefs)
|
|
Marcus
Super Member
Joined:September 2014
Posts: 993
Location:
Likes: 519
Recent Posts
Last Online May 22, 2015 15:18:12 GMT
|
Post by Marcus on Oct 15, 2014 20:53:25 GMT
Everythingliquid has the best prices for nic around As for wire, if you are just after standard kanthal then vape mesh Company is your best bet.. 317L is really for cloud chasing/sub ohm builds. For the same price I paid for 10mtrs you could get 50mtr of normal kanthal...
|
|
flavourtank
VENDOR Employee/Associate
Vape cloud Brighton :)
Joined:March 2013
Posts: 4,803
Location:
Likes: 2,786
Recent Posts
Last Online Jul 17, 2019 8:07:14 GMT
|
Post by flavourtank on Oct 15, 2014 20:54:28 GMT
Get your wire from The Vape Mesh Co... good prices on Kanthal. Don't know where you are with your coil building, but the 317l used to be sold as GPlat (until someone on Reddit figured out the company selling G-Plat was ripping people off by repackaging SS welding wire), it's for very low ohm builds and is harder to use than regular Kanthal im ok now with coils lol ive got kanthal 28 and 30 just wondered whats a better wire tbh
|
|
Marcus
Super Member
Joined:September 2014
Posts: 993
Location:
Likes: 519
Recent Posts
Last Online May 22, 2015 15:18:12 GMT
|
Post by Marcus on Oct 15, 2014 20:55:08 GMT
Get your wire from The Vape Mesh Co... good prices on Kanthal. Don't know where you are with your coil building, but the 317l used to be sold as GPlat (until someone on Reddit figured out the company selling G-Plat was ripping people off by repackaging SS welding wire), it's for very low ohm builds and is harder to use than regular Kanthal I'd recommend starting out with some 0.3mm and some 0.45mm kanthal... much thicker and you can end up with very low ohms. Easier** It wraps easier, keeps its shape a lot better, isn't springy, heats up quicker and cools down quicker... Im using it as I type and it's by far the easiest wire I've used to wrap coils =)
|
|
flavourtank
VENDOR Employee/Associate
Vape cloud Brighton :)
Joined:March 2013
Posts: 4,803
Location:
Likes: 2,786
Recent Posts
Last Online Jul 17, 2019 8:07:14 GMT
|
Post by flavourtank on Oct 15, 2014 20:56:08 GMT
For one-shot concentrates, either Chef's Vapour's own or Pink Spot or Rebranded (all 3 available from Chefs) thanks hun will go have a nosey
|
|
leo
Super Member
Joined:June 2014
Posts: 652
Location:
Likes: 447
Recent Posts
Last Online Jan 24, 2018 15:28:40 GMT
|
Post by leo on Oct 15, 2014 20:59:02 GMT
Get your wire from The Vape Mesh Co... good prices on Kanthal. Don't know where you are with your coil building, but the 317l used to be sold as GPlat (until someone on Reddit figured out the company selling G-Plat was ripping people off by repackaging SS welding wire), it's for very low ohm builds and is harder to use than regular Kanthal I'd recommend starting out with some 0.3mm and some 0.45mm kanthal... much thicker and you can end up with very low ohms. Easier** It wraps easier, keeps its shape a lot better, isn't springy, heats up quicker and cools down quicker... Im using it as I type and it's by far the easiest wire I've used to wrap coils =) I'm sure it's easy to build a coil, but it's also a bit notorious for hot spots, that's what I was referring to... not really a problem if you are experienced, but I don't know where OP is with his coil building???
|
|
flavourtank
VENDOR Employee/Associate
Vape cloud Brighton :)
Joined:March 2013
Posts: 4,803
Location:
Likes: 2,786
Recent Posts
Last Online Jul 17, 2019 8:07:14 GMT
|
Post by flavourtank on Oct 15, 2014 20:59:51 GMT
Everythingliquid has the best prices for nic around As for wire, if you are just after standard kanthal then vape mesh Company is your best bet.. 317L is really for cloud chasing/sub ohm builds. For the same price I paid for 10mtrs you could get 50mtr of normal kanthal... was thinking of everythingliquid due to finishing work in shoreham where they are based lol
i'll have a look at vape mesh for som 0.45 as I do believe ive got 0.3 in my vape box
|
|
flavourtank
VENDOR Employee/Associate
Vape cloud Brighton :)
Joined:March 2013
Posts: 4,803
Location:
Likes: 2,786
Recent Posts
Last Online Jul 17, 2019 8:07:14 GMT
|
Post by flavourtank on Oct 15, 2014 21:01:45 GMT
Easier** It wraps easier, keeps its shape a lot better, isn't springy, heats up quicker and cools down quicker... Im using it as I type and it's by far the easiest wire I've used to wrap coils =) I'm sure it's easy to build a coil, but it's also a bit notorious for hot spots, that's what I was referring to... not really a problem if you are experienced, but I don't know where OP is with his coil building??? as I say im ok with coils not really come across hotspots yet lol
|
|
Marcus
Super Member
Joined:September 2014
Posts: 993
Location:
Likes: 519
Recent Posts
Last Online May 22, 2015 15:18:12 GMT
|
Post by Marcus on Oct 15, 2014 21:06:42 GMT
Easier** It wraps easier, keeps its shape a lot better, isn't springy, heats up quicker and cools down quicker... Im using it as I type and it's by far the easiest I wire I've used to wrap coils =) I'm sure it's easy to build a coil, but it's also a bit notorious for hot spots, that's what I was referring to... not really a problem if you are experienced, but I don't know where OP is with his coil building??? Ah, I thought you was referring to physical attributes. My bad
|
|
Marcus
Super Member
Joined:September 2014
Posts: 993
Location:
Likes: 519
Recent Posts
Last Online May 22, 2015 15:18:12 GMT
|
Post by Marcus on Oct 15, 2014 21:09:04 GMT
If you can wrap a decent coil then grab some.. Its great stuff.. Or get some tiger wire from angelfiremods, comes with KGD cotton as well Or Midlandsvaping have all the vaporgrudge wires in stock for £3 a set.. Clapton, Tiger, Celtic etc etc.. Worth playing around with.. Can get some real nice flavour from them.
|
|
leo
Super Member
Joined:June 2014
Posts: 652
Location:
Likes: 447
Recent Posts
Last Online Jan 24, 2018 15:28:40 GMT
|
Post by leo on Oct 15, 2014 21:10:41 GMT
I'm sure it's easy to build a coil, but it's also a bit notorious for hot spots, that's what I was referring to... not really a problem if you are experienced, but I don't know where OP is with his coil building??? as I say im ok with coils not really come across hotspots yet lol Just when you fire your coil and it heats up in different places... easy enough to sort out in Kanthal with a little squeeze of your tweezers. But 317L is supposed to be a bit trickier in this regard. I expect marcus will tell us if it's worth the extra effort (or if it's even a problem)
|
|
flavourtank
VENDOR Employee/Associate
Vape cloud Brighton :)
Joined:March 2013
Posts: 4,803
Location:
Likes: 2,786
Recent Posts
Last Online Jul 17, 2019 8:07:14 GMT
|
Post by flavourtank on Oct 15, 2014 21:29:00 GMT
lairey just had a look and slipped a few into basket lol the p&p price is great
|
|
lairey
VENDOR Employee/Associate
Queen of Creams
Joined:November 2013
Posts: 6,731
Location:
Likes: 6,773
Recent Posts
Last Online Apr 16, 2018 21:12:38 GMT
|
Post by lairey on Oct 15, 2014 21:39:05 GMT
lairey just had a look and slipped a few into basket lol the p&p price is great Which ones? Have you checked out yet? If not, make sure you don't forget AAEC for 10% off
|
|