Upgrading the end of the month to clouper t5

[brummiematt]

Hi to All
           Decided im going to get the clouper T5 end of the month because i like the aurotank turbo, and out of some of the mods i looked at i think the aurotank turbo looked the best on the T5 as its such a beast of a tank, i did try it while in the shop and it packed a mighty good vape with little effort, i am aware it will drain batts and juice, but i feel i wont be vaping as much as i am now with my Emow mega or when at home itaste 134, what i wanted to ask is could i stick a rda on this divice to have a try with dripping ?

                                           cheers BMatt  

[decoy]

maybe try getting in to rebuild able attys because your going to want to recoil your oun heads on the turbo 2 coils every change owch

[brummiematt]

yes two coils every time. thing is tho, i feel like the load is being shared which in the long run might make them last abit longer. back to the question, so all i will need is a rebuild able atty and start building coils

[decoy]

tbh a kayfun/rose/tyfun or even an orchid rebuilable atty will prob do as good a job if not better and the coils cost next to nothing if you build them yourself

[brummiematt]

Hi Decoy
i have spent some time now looking into the rebuildable attys and tbh they look brill, had my eye on the StattQualm very nice unit and looks easy to work on. atm i dont do any re-coiling i just buy new packs of 5 for the ready to go tanks i have, i find it easy just to wash out the many mini pro 3's i have and just stick in a new coil, but yes can get a bit costly, especially if i try new juices and dont like them ( big pile of coils hardly used, but i have a plan for these ). just for now i will still get the t5 and a few KT turbo tanks for over Christmas and come January i will invest in the re-buildable attys and start building my own coils and wicking

[dalealan]

They're a doddle to rebuild and it'll save you a fortune. This is the guide I followed but instead of making my own coils I just bought packs of 50 from fasttech and so far they've been spot on with cotton. allaboute-cigarettes.proboards.com/thread/32391/microcoil-cotton-guide?page=1&scrollTo=575580

[decoy]

Nov 16, 2014 10:35:49 GMT brummiematt said:

Hi Decoy
i have spent some time now looking into the rebuildable attys and tbh they look brill, had my eye on the StattQualm very nice unit and looks easy to work on. atm i dont do any re-coiling i just buy new packs of 5 for the ready to go tanks i have, i find it easy just to wash out the many mini pro 3's i have and just stick in a new coil, but yes can get a bit costly, especially if i try new juices and dont like them ( big pile of coils hardly used, but i have a plan for these ). just for now i will still get the t5 and a few KT turbo tanks for over Christmas and come January i will invest in the re-buildable attys and start building my own coils and wicking

have a look at shiney,s guide for recoiling the kanger heads thats how i started and it is really easy and make such a change to the vape

and can i suggest a 18650 mod box like the seigeli 100 watt or the ivp3 150 watt as the a bit more pockatable that the bigger batt mods 

[brummiematt]

Nov 16, 2014 10:48:53 GMT dalealan said:

They're a doddle to rebuild and it'll save you a fortune. This is the guide I followed but instead of making my own coils I just bought packs of 50 from fasttech and so far they've been spot on with cotton. allaboute-cigarettes.proboards.com/thread/32391/microcoil-cotton-guide?page=1&scrollTo=575580

hi dalealan
               yes looks a pretty easy thing to do and would save loads of pounds, i will give this a try with the already made ones from fastech, couple of things tho ,first the coils i use are dual coils and the link you sent showed recoiling once. second about the oms what type or thickness do you get ?   i normally buy 1.8 om kangertech ( dual ) and 2.0 om ( again dual kangertech ) depending whats in the shop, also what wick is good ?

[brummiematt]

Nov 16, 2014 11:13:38 GMT decoy said:

Nov 16, 2014 10:35:49 GMT brummiematt said:

Hi Decoy
i have spent some time now looking into the rebuildable attys and tbh they look brill, had my eye on the StattQualm very nice unit and looks easy to work on. atm i dont do any re-coiling i just buy new packs of 5 for the ready to go tanks i have, i find it easy just to wash out the many mini pro 3's i have and just stick in a new coil, but yes can get a bit costly, especially if i try new juices and dont like them ( big pile of coils hardly used, but i have a plan for these ). just for now i will still get the t5 and a few KT turbo tanks for over Christmas and come January i will invest in the re-buildable attys and start building my own coils and wicking

have a look at shiney,s guide for recoiling the kanger heads thats how i started and it is really easy and make such a change to the vape

and can i suggest a 18650 mod box like the seigeli 100 watt or the ivp3 150 watt as the a bit more pockatable that the bigger batt mods 


Hi Decoy

               i am going to give the recoiling ago with the already made ones from fastech, think ile save lots doing this, i mentioned to dalealan about the issue of dual coils as the links showed just one coil being fitted at 2 oms. i guess from here moving on to the re-buildable attys next year will be a easy when it comes to coiling.

as for the mod i already have a itaste 134 which takes 18650 battery's V2's at 2000 mAh. the reason why i was going to get the t5 was it suited the aurotank turbos and looked far to big on a box mod.   whats your view 

[dalealan]

Nov 16, 2014 17:06:10 GMT brummiematt said:

Nov 16, 2014 10:48:53 GMT dalealan said:

They're a doddle to rebuild and it'll save you a fortune. This is the guide I followed but instead of making my own coils I just bought packs of 50 from fasttech and so far they've been spot on with cotton. allaboute-cigarettes.proboards.com/thread/32391/microcoil-cotton-guide?page=1&scrollTo=575580

hi dalealan
               yes looks a pretty easy thing to do and would save loads of pounds, i will give this a try with the already made ones from fastech, couple of things tho ,first the coils i use are dual coils and the link you sent showed recoiling once. second about the oms what type or thickness do you get ?   i normally buy 1.8 om kangertech ( dual ) and 2.0 om ( again dual kangertech ) depending whats in the shop, also what wick is good ?

I single coil the kanger dual coils. Easy enough to do and I use the cheap cotton wool balls from superdrug. Bout 99 pence for 200 and one lasts aaaaages. I get the 1.8 coils from fasttech and they fit in fine.

[brummiematt]

Nov 16, 2014 10:48:53 GMT dalealan said:

They're a doddle to rebuild and it'll save you a fortune. This is the guide I followed but instead of making my own coils I just bought packs of 50 from fasttech and so far they've been spot on with cotton. allaboute-cigarettes.proboards.com/thread/32391/microcoil-cotton-guide?page=1&scrollTo=575580

what part number for the 50 pre made ones please, and do they need heating up and adjusting  

[decoy]

Nov 16, 2014 17:32:51 GMT brummiematt said:

Nov 16, 2014 11:13:38 GMT decoy said:

have a look at shiney,s guide for recoiling the kanger heads thats how i started and it is really easy and make such a change to the vape

and can i suggest a 18650 mod box like the seigeli 100 watt or the ivp3 150 watt as the a bit more pockatable that the bigger batt mods 


Hi Decoy

               i am going to give the recoiling ago with the already made ones from fastech, think ile save lots doing this, i mentioned to dalealan about the issue of dual coils as the links showed just one coil being fitted at 2 oms. i guess from here moving on to the re-buildable attys next year will be a easy when it comes to coiling.

as for the mod i already have a itaste 134 which takes 18650 battery's V2's at 2000 mAh. the reason why i was going to get the t5 was it suited the aurotank turbos and looked far to big on a box mod.   whats your view 

i dont think there are that many good 30mm attys out there and what ever you get it going to be stuck with the t5 as it will look daft on the 134

get coils and orchid ordered from fast tech i think you be pleasantly surprised by what it will do on your 134 
www.fasttech.com/products/1411/10009514/1939501-orchid-v4-styled-rebuildable-tank-atomizer

[brummiematt]

Sorry to be a pain, just took apart a kangertech dual coil and hence the dual, there is two coils in the head, so with re-coiling are we just putting in a single coil ? sorry to be a pain, but need to know

[dalealan]

Nov 16, 2014 21:24:13 GMT brummiematt said:

Nov 16, 2014 10:48:53 GMT dalealan said:

They're a doddle to rebuild and it'll save you a fortune. This is the guide I followed but instead of making my own coils I just bought packs of 50 from fasttech and so far they've been spot on with cotton. allaboute-cigarettes.proboards.com/thread/32391/microcoil-cotton-guide?page=1&scrollTo=575580

what part number for the 50 pre made ones please, and do they need heating up and adjusting  

www.fasttech.com/products/1611705 for 2ohm or www.fasttech.com/products/3033/10007182/1591708 for 1.8 lots of different options in the drop down list no heating up and squeezing together adjustments necessary and fit in the kanger heads no problem

[dalealan]

Nov 16, 2014 21:34:14 GMT brummiematt said:

Sorry to be a pain, just took apart a kangertech dual coil and hence the dual, there is two coils in the head, so with re-coiling are we just putting in a single coil ? sorry to be a pain, but need to know

Yip you can single coil the duals. If there's a bit of a gap under the grommet you can cut another bit of cotton and lie it on top as a flavour wick.