so i had a go at dripping this evening!

[damian]

...... And my build caught fire

It was a dual coil Tobh v2.5 clone running on top of an I Stick at about 35w with a resistance of 0.6 ohms.

I used Japanese cotton, cut the end closest to the dropper wall quite close to the coil and the other end about 5mm over the edge of the deck and poked the excess into the well.

I juiced it up thoroughly then pulsed it (maybe too long) and it caught fire.

Once extinguished, it caped pretty good and there was SO MUCH VAPOUR!

I like dripping now

[Deleted]

Make sure you cover the coils in juice as well as the cotton. It sounds like the cotton between the coil flashed

[letsavit]

May 27, 2015 22:22:17 GMT damian said:

...... And my build caught fire

It was a dual coil Tobh v2.5 clone running on top of an I Stick at about 35w with a resistance of 0.6 ohms.

I used Japanese cotton, cut the end closest to the dropper wall quite close to the coil and the other end about 5mm over the edge of the deck and poked the excess into the well.

I juiced it up thoroughly then pulsed it (maybe too long) and it caught fire.

Once extinguished, it caped pretty good and there was SO MUCH VAPOUR!

I like dripping now

Drop them both on the deck and have two wicks
Maybe too long if you juiced the cotton, cotton will light in a second when dry.

Glad you're enjoying dripping..

[phatfil]

i predict the next big thing will be damian conditioned wicking.. just enough fire to carbonise and create an activated charcoal coating between wire n wick for that puuuurfekt vape

[enjay]

Got to give the juice a while to soak in with a new build lol.



I was vaping my tobh at about 320 watts with a 0.2 ohm build today, no fire though