New to sub ohm vaping

[pixiguru]

I need a bit of guidance...I've just got my first sub ohm device (probably bad timing I know) I've primed the coil filled the tank with high VG liquid all seems ok.
I've been using boge cartomisers and ego batteries for about 5 years.
I saw a sale and kind of got sucked in.. Its a completely different vape than I'm used to.
When I inhale the tank/atomiser sounds bubbly like there's juice in the air pipe I've blown and cleaned with tissue..is this just how it is as the juice goes into the atomiser?
Any tips are appreciated.

[Postmodern Smoking]

Hi pixiguru (I use rebuildable dripping atomisers, so probably can't help), but it might be useful to post what sub-ohm atomiser that you're using too?

[Taylor]

Just was going to ask the same thing what tank you using.?
Sounds like it may be flooded. You need to take the coil out and blow the juice out the coil. And start again. This could happen if you over prime the coil.

[MrDJ]

as above, we need to know the tank, coil, wattage and juice. when you say high VG is it 80/90/100vg as high vg is best used in drippers.
the gurgling might be not enough wattage, too much or as said flodded.
i get it once in a while and just take the coil out and wrap in kithen towl to take excess juice off and then its fine after that.

[pixiguru]

I've got a vapouriz sub tank nano. Coil is 0.5 and it's a 50w battery the display says 4v...thinking about it now you say it's possible to over prime the coil that's probably what I did...it said put a few drops...my few was probably 5 or 6 drops onto the absorby bit.
I've cleaned it out and it's working much better. Thanks for the very quick response.

[pixiguru]

Oh and it's 80/20 vg/pg juice. I feel like I'm right back at the beginning with this!

[Taylor]

May 17, 2017 21:40:29 GMT pixiguru said:

I've got a vapouriz sub tank nano. Coil is 0.5 and it's a 50w battery the display says 4v...thinking about it now you say it's possible to over prime the coil that's probably what I did...it said put a few drops...my few was probably 5 or 6 drops onto the absorby bit.
I've cleaned it out and it's working much better. Thanks for the very quick response.

Glad your all sorted. I would recommend the aspire clieto tank. There very reliable and really easy to take apart and fill. I started off with this and the steped up to the clieto 120. There all in a sale at the moment there couldn't of been a better time to grab a couple.😀 Check the threads for the cheapest prices.

[tim]

You should start mixing your own juice if you have moved to sub-ohming pixiguru. Or it's gonna get expensive. Them tanks kill a 10ml bottle of juice in no time.......

[pixiguru]

tim I bought 150ml of juice with it to get me started. ☺in all honesty it's going to be my home and weekend device. I can't take it to work as won't be able to get away with it..

[bt]

Lots of devices do the gurgle spit, Joyetech Aio's, some Aspire's etc...... Some dont.

[djs]

May 17, 2017 21:40:29 GMT pixiguru said:

thinking about it now you say it's possible to over prime the coil that's probably what I did...it said put a few drops...my few was probably 5 or 6 drops onto the absorby bit.

A few drop is 5 or 6 when it comes to Subohm coils, maybe even a bit more.

You'll get the feel for it, but over-priming is better.

[coocookerchoo]

What watts are you running at? I've noticed sometimes that when the wattage is too high, particularly with mid-ohm coils it can cause the coils to heat up too much too fast and pow, spitting/gurgling.
As others have suggested blow through the driptip/chimney short sharp breaths and see if it continues?