LT and smoktech dct

[Deleted]

my question is has anyone had any issues with the LT (mini or full) using the smoktech dc tanks and them not firing? i was watching a video and the guy said he couldnt get them or the stone tanks to fire. my mini should be here any day now an i love the dct's and so wanna know if that his was an isolated incident or a common occurance

[chickengeorge (Quezz)]

I bought a 3 1/2ml DCT ( not sure if it`s smoktech or not) on the last GB to give them a try as i`d never had one before and on my LT i need to use a 510 to 510 adapter to get in to work,

I`m using health cabin pre punched carts at the minute with the flange thingy at the bottom and just put it down to using those.

[maccafan]

If they are 1.5 ohm versions, your LT will really struggle above 3.3 volts and possibly not fire to your satisfaction anyway..

[Karma]

there is not really anything to be gained by using a DCC or LR carto on a LT. Best just to use standard risistance then you can play about with the volts!

save you DCCs and LRs for your Argento

[Deleted]

are there any uk vendors who sell pre punched cartomisers for tanks in higher resistance?

[maccafan]

Jun 10, 2012 17:20:17 GMT staf said:

are there any uk vendors who sell pre punched cartomisers for tanks in higher resistance?

Ecigwizard does them upto 3 ohm..

www.ecigwizard.com/shop/en/puff-tank/325-pre-punched-dual-coil-cartomiser.html

[Deleted]

is it worth goin for the 3ohms or just the normal 2ohm? i watched a pbusardo video and it showed what the carts could handle before the LT limited it and higher ohms have a wider range of voltage. have i just answered my own question ???

[maccafan]

LT and the Provari V1 never handled dual coil cartos very well because of the current limitation..Not many people were happy with them if I read the various messages posted around the forums correctly..

I don't use cartos or tanks at all so I have no experience of them at all..I am sure someone will be along to share their experience with you..

[Deleted]

cheers macca

[Deleted]

I think you answered your own question higher resistance on a vv gives you more control so go for the 3 ohm . Or stick to lower voltage with lr cartos

[Deleted]

i really like the tank setup so i'm going for the 3ohm cartos. bosh, wallop, job done......tidy!

[Deleted]

I got some 2ohm flanged cartos on a gb , much better than the 1.5 ohm supplied with my tank when I got it . Then I got some visions and my tank set up has rarely been used , although I find the tanks brilliant when on a long drive

[Deleted]

hmm tanks now i forgot about them they are good if you dont want to keep filling but i come across these new fangled things call visions and the tanks are not seeing the light of day

[Deleted]

Same here colli , although I think I'll be going back to the V1's as long as there is a supply , the V2's for me wick TOO well and flood the coil. Nothing to do with the silicone cap inside either. Never had the problem with the V1