SD Ego

[maccafan]

Anyone own a SD ego currently or before and can remember if it has 5 or 3 click protection?

[Scarface]

Macca

As far as i can remember my 2 SD batts - 1 of which is currently in your possession , did not have any click protection.

Please correct me if im wrong folks?...

[maccafan]

OK great.. That's fine..

I was wondering if something had gone wrong with the circuitry..I could only find a 900 mAh battery as a spare and I have put that in and it is charging and working fine but I could not turn it off. However, the connector is very deep and all skirted 510-mizers like the CE4+ don't work on it without a 510-510 or 510-ego adapter. I have put an extra washer behind the posi pin to lift it and give it a spring effect but and even then skirted -misers are bottoming out on the shoulder before the posi pin can make contact. Works fine though and without any adapters, with cartomizers.

I'll have a crack at the VV tomorrow and see if I can sort that one out this weekend.

[blakey]

The one I had came with no click protection at all macca, it never turned off. It died when I let it run down and never got round to recharging it, took the battery well below it's lower limits when it drained

[maccafan]

Thanks Blakey..Must be the original ego type circuitry but with an unregulated 4.1 to death volt output.

Nice looking connector but so deep..Made for cartomizers with a cone and useless with skirted clearos without an adapter..

[Scarface]

Aug 17, 2012 18:07:19 GMT maccafan said:

OK great.. That's fine..

I was wondering if something had gone wrong with the circuitry..I could only find a 900 mAh battery as a spare and I have put that in and it is charging and working fine but I could not turn it off. However, the connector is very deep and all skirted 510-mizers like the CE4+ don't work on it without a 510-510 or 510-ego adapter. I have put an extra washer behind the posi pin to lift it and give it a spring effect but and even then skirted -misers are bottoming out on the shoulder before the posi pin can make contact. Works fine though and without any adapters, with cartomizers.

I'll have a crack at the VV tomorrow and see if I can sort that one out this weekend.

thats fine macca, cheers

[pedaldog]

Bit confused here "SD"?
I always think of the Screwdriver as the "SD" so what manner of device do you speak of here ???

Oh! Do you mean the Ego device from the Screwbydriver people?

[maccafan]

Aug 17, 2012 23:12:31 GMT pedaldog said:

Oh! Do you mean the Ego device from the Screwbydriver people?

Yes.

[pedaldog]

Cheers Macca