NEW Dominator - SS rebuildable clearomizer tank

[callum-YouVape]

hi peeps

introducing the New dominator tank @health-e-vape

The dominator can hold approx 4 ml of eliquid in its top liquid compartment the juice gets from the top tank to the bottom tank by 2 wicks that wick the e-liquid down to the bottom tank where it meets the coils the thin tube through the top tank is the air way this sucks up from the bottom tank pulling the liquid down through the wicks and the vapour up the air tube .


fully re-buildable

all metal is pure stainless steel

510 connection

single or dual coil use

performs great

comes complete and setup to use with a drip tip
also included

2 x spare springs

1 x spare wick and coil
please note : that if using it with two coils please use high resistance of over 3.0 ohms each wire .
www.health-e-vape.co.uk/new--dominator-tank---rebuilable-clearomizer-tank-system-in-stock-3154-p.asp

thanks

callum

[OneDay]

Link doesn't work Callum

[callum-YouVape]

Sept 12, 2012 14:32:37 GMT OneDay said:

Link doesn't work Callum

sorted and heres some pics

[callum-YouVape]

apart

[callum-YouVape]

Comes with 2 spare spring posts + spare wick and coil

[scaffman69]

Bear with me here m8 plz , im looking for summink like this it looks fairly straight forward, as in rebuilding it , im fairly new to vapes, about four months, i been looking at vids how to rewire and recoil your own vivi nova, so im gonna take the leap , but my question about this , is when the coil burns out , would i just rebuild my own with mesh and wire coiled around ? i hope you understand this, ty for your help.

[callum-YouVape]

hiya scaffman

yes thats right when you are finished with the current coil you can re build it with wick and coil take the wick and coil the wire around the wick there are lots of videos like you say on how to do it and tips . we have wick and coil also available on the re buildables page . hope this helps

[scaffman69]

Thank you m8 .

[DiscoDes]

Scaffman, coils don't burn out that often these days, they just gunk up with a hard carbon deposit, you can remove some of it by doing a dry burn, but even this will not keep it fully free, then it's time to recoil. The Vision V3's are very easy to recoil. Callum does some pre wound coil around wick which you just cut to length.
I've just ordered some, you can recoil a V3 Stardust with the onlt tools needed are a pair of scissors.

Maybe later you can try one of the more advanced rebuildables.

[scaffman69]

Yes m8 i got some spare tips on order from china ,. but if its easier to recoil i may as well go that way, your a star , ty.

[callum-YouVape]

a quick video sorry its not the best but will do for now
sorry for the pause from 3.12 to 3.50 not sure why its come out like that

[OneDay]

Callum should there be sound on the video? I can't get any audio

[callum-YouVape]

Sept 14, 2012 9:34:03 GMT OneDay said:

Callum should there be sound on the video? I can't get any audio

hiya buddy sorry im not sure why it come out like that was fine when recorded you can hear the sound actually cuts out at the start .

[callum-YouVape]

DONT FORGET to use AAEC for 12% off your order and grab a bargain

[callum-YouVape]

you fill the domiantor tank from the top like shown here