New Lavatube v2.1 Problems

[cactusjack]

Vape mail today, nice new lavatube in gun black from Vapourhut. Put in my new fully charged AW IMR 18650 2000 mAh and put on my VV Nova with some of my home made juice. Showed full bars on the battery display, the ohm reading about right for the 1.8ohm heads I was using. Then the battery went down after about five hours of vaping (I would normally get ten hours out of my 1000 mAh Twist) Anyway put in a new fully charged battery got the initial flashing on the display as normal, set it to 4 volt put my Nova vv back on and did ohm reading I'm getting 0.0 resistance. When I press the power button it comes up on the display as lo, by this time after no firing the battery bar has gone down to one bar in the space of an hour. I checked the battery on my meter it's showing 4.1 volts, the Nova vv works fine on my twist, tried different heads and centre pin pulling, still nothing. Checked the volts with my meter when firing with nothing screwed on and get a reading of 4.46 volts but still not fire up my nova or anything else.

Any ideas anybody......

[alvoram]

Contact vapourhut, looks like you've already tried changing many variables, so may be a faulty device. Although, have you tried a cartomiser, atty, clearo, or a different nova, rather than just a different head?

[Anne (fuzzy)]

If I'm using a 1.8ohm head, I don't go above 3.7V, but don't know if that has any significance or not with your initial problem ???

[cactusjack]

Tried everything and I am pretty sure it's faulty, does not inspire confidence in a replacement and how long that will last.