jackop
New Member
Joined:August 2012
Posts: 48
Location:
Recent Posts
Last Online Feb 7, 2022 11:21:46 GMT
|
Post by jackop on Oct 17, 2012 7:36:30 GMT
Hi Guys,
I got the Mini nova tank from vape escape about 3 weeks ago. Put the SR atty in, worked like a champ.
Put the LR atty in, worked for 2 days then after a refill in the morning, dead. No hit at all, no vapour just dead.
Put the SR atty back in worked for about another week before the flavour started to go. All in all I would say the SR atty was in for about 17 of the 21 days iv had this tank.
I put the HR atty in while I wait for a parcel from vape escape (5 more SR attys coming today hopefully).
It has lasted 2 days of 2ml a day before dying again on me this morning. Same symptoms as the LR one, its gone straight after a refill.
Iv tried blowing it out so many times my head nearly popped, I presume i blow back down my drip tip towards the connection to the battery right (disconnected from it of course) and onto some tissue paper.
Any ideas? Is it me or are they duff? Just seems strange that they both go after a refill.
Cheers all
|
|
blakey
Super Member
Ninja Maestro
Joined:June 2011
Posts: 9,206
Location:
Likes: 4,242
Recent Posts
Last Online Nov 22, 2024 19:52:52 GMT
|
Post by blakey on Oct 17, 2012 7:56:35 GMT
It sounds like when you unscrew the top cap to refill that the attie is also unscrewing from the post caused by the silicon sleeve sealing to the top cap, re-tighten the attie by removing the rubber/silicon sleeve and use a screwdriver or similar to screw the attie back down. That should resolve your issue.
|
|
jackop
New Member
Joined:August 2012
Posts: 48
Location:
Recent Posts
Last Online Feb 7, 2022 11:21:46 GMT
|
Post by jackop on Oct 17, 2012 8:08:52 GMT
Genius Blakey! Just screwed it back in with a flat head, it was almost falling off, really loose. Now working again, Ill try and get some more life out of that LR atty too. Thanks so much!!
|
|
blakey
Super Member
Ninja Maestro
Joined:June 2011
Posts: 9,206
Location:
Likes: 4,242
Recent Posts
Last Online Nov 22, 2024 19:52:52 GMT
|
Post by blakey on Oct 17, 2012 8:11:07 GMT
Genius Blakey! Just screwed it back in with a flat head, it was almost falling off, really loose. Now working again, Ill try and get some more life out of that LR atty too. Thanks so much!! No problem, just keep an eye on it when topping up
|
|