Rewick and coil vision Nova

[meeee]

Hi
I am planning on attempting to recoil / Rewick my vision novas and was wondering what gauge wire and wick i should use. I will be looking to achieve about 1.8 - 2 ohms

thanks

Meeee

[timnowvapes]

I use this:

www.health-e-vape.co.uk/1-x-1m-25-mm-fibre-glass-wick--1x-1m-15-mm-standard-resistance-nickelchrome-coil-wire-3071-p.asp £2.80

I achieve 2.2 Ohms and have the best vape from a Vivi and Vision V3r compared to the pre-made ones

Easy to use, the only thing I would say, is use a really decent pair of cutter / scissors to cut the wick or it frays. Dead easy to do though, and plenty of it if you make a little mistake

[blakey]

In a nova I use 3cm of .15mm wire to make a 2ohm coil. I also use no resistance wire for the connections.
The reason I use .15 is because the chamber that coil sits in is quite narrow.
If I were to use .20 wire I would need about 5cm of wire to make the same resistance coil which would equal more coils to try to fit in a tiny space.

[meeee]

Thanks for the advice

Meeee