Kanger T3 wont screw on ?

[jeffc]

Hi All.
Kanger T3 screws onto all my ego batteries, no problems.
But it wont screw onto my new Lavatube V2 (Young June).
Fitted 510 - ego thread adapter, still will not screw on.
What next ???.
Won`t to be able to use LT with all my gear.
Thanks in advance for your help.
jeffc.

[Ellen]

#attachment# only thing I can think, are you sure you got a 510- ego adapter? Do you have a vision ego or something else that does screw into it?

[Sandra (aka Chillax)]

My T3 wont screw on to an 510-ego adapter either I think some have bad threads, I asked Jason which adapter was best and he posted a pic on one of his threads with it screwed on fine but mine doesn't want to know.

[Ellen]

That's weird, mine screws on ok, don't know where the adapter I have comes from though, I got it with the steam machine ???

[Sandra (aka Chillax)]

Yeah tiz a bit strange, my 510-Ego adapter works on everything, the T3 only screws onto my Ego batteries, it doesn't bother me as the T3 is not my cup of tea but I am buying a Vamo for my daughter for xmas and she loves the T3 and asked me to try it on the Vamo, that's why I asked Jason about it. I am just guessing some of the T3 threads must be a bit bad.

[300]

Hi jeffc

It’s bad luck that you got an adapter that doesn’t fit, I have several std 510/ego adapters & the Kanger T2 & T3 do fit them all bar 1, I guess the threads on the adapters aren’t as forgiving as the ego batteries & I do have to be careful to line up the threads properly.

I also have a Cisco sealed 510/ego adapter, the threads seem to be more in tune with the T2 & T3 & they screw on & off just fine.

I wonder if you could ask one of the vendors to try one out with the T3, at least that way you’d know you were getting one that fits OK.

[manicmedic]

The Kanger doesn't have the internal 510 thread which is why it won't go on anything that doesn't have the skirted ego threads.

[300]

Dec 1, 2012 0:14:35 GMT manicmedic said:

The Kanger doesn't have the internal 510 thread which is why it won't go on anything that doesn't have the skirted ego threads.

That's correct, but you would have thought that it would screw on to jeff's 510/ego adapter

[jeffc]

Thanks every one.

I shall order a new 510-ego adapter but will ask vendor to ensure that Kanger T3 screws on correctly.

Hope you all have sent your letter to "Santa", for that special Xmas pressy.

I have but don`t hold out much hope of getting it. (provari).

Might win the lottery, then I shall buy everything on my wish list.

ha,ha,ha,

[jeffc]

Thanks too Jason @ Vapeescapes I now have a fully fitting 510-ego adapter that fits my Kanger T3 units.
LT working a treat with the T3.
Thanks all for your help.
"Merry Christmas" and a "Vaping New Year"

[tegana]

My 510-ego adapter doesn't thread into the Kanger either. The threads won't catch, the adapter will just spin inside the Kanger connector. I'm going to order another adapter to see it that will work since I've read so many posts on other forums that others have had no problem using an adapter to get the T3 to work with the Vamo.

[jeffc]

Hi Tegana. Order a new 510-ego adapter from Vapescapes, tell them to check it fits Kanger T3.
Jason/Ellen sorted me out, as I had the same problem.
The Kanger T3 fitted onto Vamo is a`great` vape, you`ll love it.
Go to read Dizzi thread: Kanger T3. What Am I doing wrong:
Welcome to AAEC. Happy New Year to you.
jeffc.