aga-s driving me barmy!@?$

[kingofswords]

so ive got all the coils glowing red and the legs to stop glowing and the wick to not touch the bottom ad it puffing out the vapour and has good TH(although not great batt live or long lasting juice) but the flavour totally sucks. first couple of drags i get really muted flavour then just burness(not metallic)

im using 400 mesh with 100% pg ad 70/30 pg/vg and the mesh fits snuggly(might be a little too snug) .....altough ive tried vaping with the fill hole removed and but get same result.

only gone through a couple of tanks but my 5 month old ce2 tastes much better with the same juice.

anyone got any ideas?

cheers

[blakey]

Look closely at the top coils king, is all of the vapour coming from there? if so you need to nudge the coils about a bit, It sounds like the wick is doing its job very well and masking the fact that the top of the coil is doing all the work and burning the juice in the process.

[kingofswords]

[blakey]

Well it looks to be wicking fine

[izan]

Dec 22, 2012 14:40:01 GMT kingofswords said:

Is your air hole lined up with your wick/coil?
Everything else looks GREAT.

[kingofswords]

that sounds about right blakey..originally it was just the top coil working until i messed around with them then they all worked. but its usually the top coil that glows 1st. btw this is even at 3.2v

im in the libary so cant check yet. if thats the case should i just recoil it?

[kingofswords]

hi izan..i think so..wick hole is lined up with coils....but i thought this just gives greater TH whereas if its 90degree angle it gives more vapour kinda thing.

anyway the hole is at bottom coils...does that make any difference?

[blakey]

Dec 22, 2012 14:46:37 GMT kingofswords said:

that sounds about right blakey..originally it was just the top coil working until i messed around with them then they all worked. but its usually the top coil that glows 1st. btw this is even at 3.2v

im in the libary so cant check yet. if thats the case should i just recoil it?

You just need to nudge them coils about till the whole thing works evenly king, if only one or two coils are doing all the work it explains Why your juice is burning.
If you have no luck with the nudging then recoil the bugga

[Mev]

don't have the aga-s myself but is that a bung I can see in a filling hole ? if so and your wick is tight it could be an airflow problem, air needs to be able to get into the tank to replace juice.

[andy01424]

ok maybe long shot top two knurl nuts,if they are dome'd on one side turn them over so both FLAT surfaces meet,better connection,this one of few things i tried, among redoing wick and coil,and my old clone vapes like a steam train now,in fact both do lol
also do not have filling screw in either ,uhmm that pinged off desk somewhere so that was a mishap bit lol