Ohms to aim for ?? set up.

[jeffc]

Hi All. Hope you all had a great christmas.
Question.
I have AGA-t, and Mini DID copy,, both I intend to set up with usage of s/s wick. E-cig will be a Vamo at around 8 watts.
What Ohms should I aim for ??? ???
How many wraps using 0.20 Kanthanal wire ? ???
Thanks in advance for your help.
"Happy New Year" to you all.
jeffc

[cheekiecharlie]

I usually have my ohms anywhere between 1.4 and 1.9, I would recon about 4 wraps with .2 , I'm using .22 and .25 at the moment and one has 4 wraps and another has 5/6 with the .25
If you try 5 wraps and the ohms are higher just take 1 wrap off and check again , but if you are using watts the device will adjust automatically for you

[Skwoddy]

Mine are anywhere between 1 and 2 ohm, but your luxury with the vamo is you just set the wattage and let the mod do the calculations, not an issue regardless of coil, although you dont want to be wrapping 3-4 ohm coils as that would just drain your battery a whole lot quicker, aim for 5 wraps of 0.2 on a standard 2mm wick obviously more on thicker wire.

[jeffc]

Thanks CheeckieCharlie & Skwoddy.
Will take notice and act upon your advice.
Happy New Year to you both.
jeffc

[Sandra (aka Chillax)]

If I remember, the Vamo won't like a 1 ohm coil, I also use 0.2 wire around four wraps giving me between 1.4 - 1.7 usually but it will also depend how thick your mesh is slightly differing the eventual ohm. But my Vamo is usually set to 8-8.5 w.