New year new modding - prices reduced

[warlordxxx - (Mark)]

Hi everyone,

Hope you all had a wonderful christmas and aren't too stuffed with turkey and stuffing e-liquid ...

As the old year is about to depart and move onto a new one i've popped a few items together for a discount and added something nice and new at the end...

Please don't purchase these items through the site as the festive discounts will be for forum members only so please do flip me a PM if there is anything you would like or if you have any questions..

Have a wonderful new years,
Mark

[warlordxxx - (Mark)]

Ok first up is the smaller 14500 mod - started making these in the beginning of vaping and have given away and sold more than i can remember but i made some stock and have some left so these are first up for sale



Warlords 3.7v box mod

Made with a black 3a horn switch with a 5mm ultrabrite led.

Batteries
A 14500 3.7v Li-Ion protected battery will fit into this mod.

Please ALWAYS USE protected batteries inside this mod using unprotected batteries may lead to battery failure and render the battery useless.
Please charge your batteries safely and to the chargers guidelines – Never leave the house while batteries are charging or use a charger overnight.
To ease removal of the batteries use a piece of insulation tape wrapped around the battery with the ends joined to make a pull tab.
If shorting occurs in this mod there is a switch at the front to turn the device off cutting power from the battery – This is a safety feature on the device but can also be used to prevent mis-fires in the pocket and to switch the device off when not in use.

General Use
This mod uses a high powered LED please do not stare directly into the LED as it is powerful.
The 14500 battery fits into the mod as per the diagram on the inside of the box – Negative (flat side) to the spring – Positive to the flat terminal
Once the battery is inserted close the door of the mod and move the on-off switch to the ON position press the button switch and the LED should now light up – If there is no power to the LED remove the door and battery and re-insert.
Attach your atomizer or cartomizer to the top 510 connection – Press the button switch and vape.


Available colour combinations

Black button - choice of Blue,Red,Green or Pink LED

Blue Button - Blue LED

Red Button - Red LED

Green Button - Green LED

Price of these is now down to £6 including P&P and paypal fees - i do also still have a few boxes left so please let me know if there is something different you would like.

[warlordxxx - (Mark)]

Next up is the first mods bigger brother the twin 14500. These were a natural progression from the first mod and offer the same voltage but with almost twice the run time - can be used with one or two batteries - If you use two please charge and use them together at the same time and again use protected batteries in this mod...



Warlords 3.7v box mod

Made with a black 3a horn switch with a 5mm ultrabrite led

Batteries
14500 3.7v Li-Ion protected batteries will fit into this mod.

Please ALWAYS USE protected batteries inside this mod using unprotected batteries may lead to battery failure and render the battery useless.
Please charge your batteries safely and to the chargers guidelines – Never leave the house while batteries are charging or use a charger overnight.
To ease removal of the batteries use a piece of insulation tape wrapped around the battery with the ends joined to make a pull tab.
If shorting occurs in this mod there is a switch at the front to turn the device off cutting power from the battery – This is a safety feature on the device but can also be used to prevent mis-fires in the pocket and to switch the device off when not in use.

General Use
This mod uses a high powered LED please do not stare directly into the LED as it is powerful.
The 14500 battery fits into the mod as per the diagram on the inside of the box – Negative (flat side) to the spring – Positive to the flat terminal
Once the battery is inserted close the door of the mod and move the on-off switch to the ON position press the button switch and the LED should now light up – If there is no power to the LED remove the door and battery and re-insert.
Attach your atomizer or cartomizer to the top 510 connection – Press the button switch and vape.


Available colour combinations

Black button - Blue LED


Price of these is now down to £8 including P&P and paypal fees - i do also still have a few boxes left so please let me know if there is something different you would like.

[warlordxxx - (Mark)]

Third in the set is the 5v mod i made a few of these in one go but not too many as a lot of people do prefer variable voltage - but there are some that are happy with 5v regulated so i felt they deserved to be made.. The regulator is short and undercurrent protected so unprotected hi-drain batteries can be used in this mod - however please buy the nippled type batteries or ask via PM and i will happily convert the box for flat type use..




Warlords 5v box mod

Made with a 3a horn switch in black - No LED
510 connection
Takes 2 x 14500 protected batteries (not supplied)
Uses a 3a TI regulator

Regulated to 5V warlords 5V box gives a fantastic vape with plenty of vapour and throat hit.


Again i have plenty of boxes and regulators so if you would like a different combination please feel free to ask.

Price on the 5v mod is now down to £12 P&P and paypal fees included

[warlordxxx - (Mark)]

Although i do have some other items to go in here at the moment they are incomplete so forgive me for the moment and i'll head straight to the new...


New for 2013 is the battery meter, a simple device with spring loaded arm for testing batteries wether it be to see if they are dead or just to check if you charged it or not..



Warlords Battery Tester



Battery tester for all your battery voltage needs - I came up with this idea with the help of a group of friends to test your batteries.
Test your batteries when you take them off the charger
Test before putting into a mod
Ensuring batteries are the same level on insert and removal from dual battery mods



Tester limits
Voltage range: 2.8v - 25.2v
Accuracy: +- 0.005v
Tests 16340 up to 26650
Will test flat top and nipple topped batteries



Arm is spring loaded and whole unit can be placed into your pocket and taken with you - Please note these are hand made using standard battery meters.


Price for the Battery meter is £6 (on site for £7.99) + £1 P&P - Paypal fees included

[piper1]

Pm sent

[warlordxxx - (Mark)]

Thank you Piper a return PM is in your inbox

[warlordxxx - (Mark)]

Todays mods are the good old Altoid tins..

Warlords Altoid VV Tin mod
Made with a black 3a horn switch. A dual 14500 battery mod that just plain works voltage range from 3v - approx 6v (depending on energy remaining in the batteries)
Please ensure both batteries are at a level state of charge before placing them in the mod to use.
Mods will be set to 4.2v before sending




Features
Native 510 connection
Stainless washer / Drip guard ( spaces out the connector so tanks can be used without issue
Interior volt meter
Interior pot adjustment
Interior on/off switch
3A horn switch

Batteries
14500 3.7v Li-Ion protected batteries will fit into this mod.

Please ALWAYS USE protected batteries inside this mod using unprotected batteries may lead to battery failure and render the battery useless.
Please charge your batteries safely and to the chargers guidelines – Never leave the house while batteries are charging or use a charger overnight.
To ease removal of the batteries use a piece of insulation tape wrapped around the battery with the ends joined to make a pull tab.
If shorting occurs in this mod there is a switch at the front to turn the device off cutting power from the battery – This is a safety feature on the device but can also be used to prevent mis-fires in the pocket and to switch the device off when not in use.

General Use
The 14500 batteries fit into the mod as per the diagram on the inside of the box – Negative (flat side) to the spring – Positive to the flat terminal
Once the batteries are inserted move the on-off switch to the ON position and close the door of the mod. Adjust voltage as required using the small screw on top of the blue potentiometer.
Attach your atomizer or cartomizer to the top 510 connection – Press the button switch and vape.


Altoids tins have now all sold out but if you would like a tin or custom tin let me know and i'll happily create you you're own tin for £20

[warlordxxx - (Mark)]

Prices have been reduced on the website so have reduced the forum prices further.

[chrisss]

Received a twin 14500 mod from Mark yesterday. This is a mod with buckets of old-fashioned charm, it is like something my dad (a scientist and engineer) would have made when I was a kid. It vapes great and when I took it down the pub to show my (non-vaping) mates they were fascinated by the visible internals, wiring etc.. The case is plastic and won't stand much throwing around but if you want an inexpensive new toy that doesn't look like a sonic screwdriver I can recommend this.

Chris

p.s. I'm saving up the pennies for an Altoid tin mod now.

[warlordxxx - (Mark)]

Awesome Chris glad you are enjoying it mate - the boxes actually take a fair bit of punishment - i still use the one i built in April 2011 to this day and it's been thrown around everywhere lol. As for tins if and when you have your pennies together just let me know (you also don't have to have altoids if you would like a different style tin)

Many thanks
Mark

[Di]

Dec 29, 2012 16:45:05 GMT warlordxxx - (Mark) said:

Although i do have some other items to go in here at the moment they are incomplete so forgive me for the moment and i'll head straight to the new...


New for 2013 is the battery meter, a simple device with spring loaded arm for testing batteries wether it be to see if they are dead or just to check if you charged it or not..



Warlords Battery Tester



Battery tester for all your battery voltage needs - I came up with this idea with the help of a group of friends to test your batteries.
Test your batteries when you take them off the charger
Test before putting into a mod
Ensuring batteries are the same level on insert and removal from dual battery mods



Tester limits
Voltage range: 2.8v - 25.2v
Accuracy: +- 0.005v
Tests 16340 up to 26650
Will test flat top and nipple topped batteries



Arm is spring loaded and whole unit can be placed into your pocket and taken with you - Please note these are hand made using standard battery meters.


Price for the Battery meter is £7 (on site for £7.99) + £1 P&P - Paypal fees included

Received in the post this morning, thanks Mark, been testing all my batteries lol!! Lovely addition to the kit box. Di x

[warlordxxx - (Mark)]

Awesome Di - the post is usually pretty quick around here but honestly didn't think you would get it until tomorrow - i use mine most often when i can't remember which batteries i charged and which i didn't lol

[Di]

Hi Mark,

Re the battery testers you make - Do you have any left??

I have to say thank you for making these, mine has proved to be an invaluable piece of kit, I use a 'wee' gripper mod or an udt-l 510 mod to take out with me, and this little device is so handy to test the batteries, it fits in my bits and pieces carry case perfectly, so much easier than having to cart my vamo around, which would be such a fuss to take apart and re-assemble just to test a battery! And would defeat the purpose of having the smaller mods in the first place! this is so simple to use and is perfect for the job (I like simple, lol!)

Thanks

Di


Just realised that A PM would probably be a good way to get in touch with you!! Doh!!

[warlordxxx - (Mark)]

Mar 13, 2013 9:36:30 GMT Di said:

Hi Mark,

Re the battery testers you make - Do you have any left??

I have to say thank you for making these, mine has proved to be an invaluable piece of kit, I use a 'wee' gripper mod or an udt-l 510 mod to take out with me, and this little device is so handy to test the batteries, it fits in my bits and pieces carry case perfectly, so much easier than having to cart my vamo around, which would be such a fuss to take apart and re-assemble just to test a battery! And would defeat the purpose of having the smaller mods in the first place! this is so simple to use and is perfect for the job (I like simple, lol!)

Thanks

Di


Just realised that A PM would probably be a good way to get in touch with you!! Doh!!

LOL Hi Di,

Yup i still have plenty of battery meters available i made a rather large batch of them up - They are an extremely handy thing to have - especially if you are like me and have multiple different battery types and can't remember which one you have charged. Feel free to contact me via PM