Need some photo's of home made mod internals pleas

[piper1]

Just wondering if anyone who owns a home made Tin mod/device if they wouldn’t mind taking a few photographs of it for me.
Going to start making one for myself and just wanted see the general layout and types of components used.
If you can pm me i will send you my email addy

Really appreciate it

Piper All the best for the New Year

[robdelmar]

have posted some photos on Vapourtrails.TV Forums
Mods & Devices
Show off your mods
I'm on there as rob
if it's any help. get all my parts of ebay

[dizzi]

Bit late with this one, but you can look at Darth Vaper here: allaboute-cigarettes.proboards.com/index.cgi?action=display&board=modding&thread=14212&page=1#281638. I've since swapped out the battery (which was an Efest IMR 18650) for an Efest IMR 14500 in an AA wired battery box as I found the fit for the 18650 more than a bit tight and potentially dangerous if the insulating tape wore through.

Left side is the neg wire from box to outside of 510 connector (LF now has these pre-wired which is handy, or I recommend you get your connector along with some professional advice and help from Mark at Warlords Mods, he'll probably wire your connector for you if you ask nicely). Right side is pos connection from battery to kill switch, then kill switch to firing button, then firing button to inside of connector. All the kit except the tin came from Warlords. Tin came from Candy Hero, they have lots of fun designs but they're not cheap. You do get free mints with the tin though

ETA = the tin is mostly insulated inside with electrical tape, and I've hidden the longer wires under more electrical tape. I used hot melt glue all around the connector to keep the wires in place and also give the connector some extra buttressing. The kill switch is also hot glued into place after soldering.

[piper1]

Thank you for the replies.

[garrydibley]

Have a look here mate a years worth of modding

www.vapourtrails.tv/?page_id=3136

[piper1]

Thank you