vamo problem.no1, no2,

[stig1978]

Just a quick question. I always use my vamo set to n02. iv just took my aga t of it and put a vivi nova on it with a brand new head in it the dam thing cooked it. i checked the settings. It was set to n01 again. its done this 3 or 4 times now. any body else had this problem?

[Deleted]

Not had the problem, or heard of anyone else having it.

Are you setting it correctly?

Press either of the two smaller buttons for 10 seconds, or so. If it displays No1 it was set to RMS and is now set to AVG. If it displays No2 it was set to AVG and is now RMS. You can't check what it is set to without changing the setting.

[stig1978]

ye i set it correctly. i all ways have it set to n02 rms setting. i held the small button down for 10 secs. it showed n02. so it was set to the n01 avg setting. this is not the first time its done it.

[Rybes]

just a thought but without realisin it, are you pressin those 2 buttons when you unscrew your chosen fluid burner ?

[Deleted]

Sounds as though there is a fault then, as I said I've not heard of that problem before. Unless anyone else knows different ???

[stig1978]

No i all ways hold the bottom two sections when i change the burner over. i keep me hands well away from the buttons. after i was cleaning the coils on the aga t and pressed the fire button while my thumb was on the coils.

[jud]

are you using it in vv or vw mode, as i was thinking if you was using the vv mode and as we know it does not remember the volt settings, if avg is the default could it be going back to this after switch off.
but you can forget this if you are using vw, just a thought

[Deleted]

Doesn't matter if it is VV or VW it should still retain AVG or RMS setting.

[stig1978]

Its set to vw. i never use vv as when ya change the battery it sets to 3 volts one little tap of the minus button it goes straight to 6 volts. not good If ya got a low res head on it. at least in vw it reads the ohms of the head and drops the voltage.

[jud]

Jan 27, 2013 12:54:15 GMT @cornersruns said:

Doesn't matter if it is VV or VW it should still retain AVG or RMS setting.

yeah you right ive just tried it out