WTB: Charger

[brysoni23]

I am after a charger that will charge 18650's and 18350's. Vamo is on its way and 2 x 18650s are on the way too.

I know there is plenty about online. But wanted to see if anyone wanted to get rid of one and sell it to me before i go and purchase one once im home from work at about 9pm.


Cheers
R

[DiscoDes]

Get a X-Tar WPII

[archiecat]

I'm with Dico, mine was about £12 on fleabay, nice device.

[millerkev]

xtar wp6 all you`ll ever need :-) around 20 quid but well worth it

[Deleted]

I have an Xtar WP2 II and a Nitecore i4. Both great chargers but out of the 2 I would go for the Nitecore simply because it also charges NiMH batteries as well, plus it's a great charger anyway.

[Deleted]

+1 for the nitecore

[brysoni23]

have any of you got a link where you got it from? and any discount codes.
I wish i noticed the Nitecore last night ecig had teh 30% off plus my wiz points could of got it for £14 or so
boooo

[andy01424]

i4nitecore
£18.49 with discount,plus you can use it to recharge Li-ion, Ni-mh and Ni-Cd others will only charge Li-on batts,so nitecore is a multi battery charger
www.ecigwizard.com/en/accessories/batteries-chargers/chargers/nitecore-intellicharge-i4-charger.html

[Deleted]

I typed up a short review of the Nitecore on ecigwizard last night, hopefully it helps someone

www.ecigwizard.com/en/accessories/batteries-chargers/chargers/nitecore-intellicharge-i4-charger.html#product-tabs

[Balllsy]

+1 for the Nitecore

[vicuk]

help will this Imax b6 li-ion/polymer balance charger work with both charger that will charge 18650's and 18350's please thanks vic

[Deleted]

I'd go for an Xtar MP1,wp2 or WP6 or Nitecore i4 or i2.

The Imax B6 will charge 18650's or 18350's but you will need to buy battery cases and wire the batteries up properly to enable balance charging or just charge 1 cell at a time. If you need to ask if it will work you really don't want to be using it. There are lots of settings needed to be set correctly and the wiring has to be done correctly. This charger is really designed for high capacity batteries used in RC models and other applications.

Just use a charger that is designed for the cells we use.

[Tom]

I too have a vamo on the way, I too aksed for help on this forum for what to get as a battery setup.

Forum thread - allaboute-cigarettes.proboards.com/index.cgi?action=display&board=general&thread=17763&page=2#335311

I had some realy useful advice.

I ended up getting the panasonic 2x18650 3400mah from amazon.

Charger & 2x18350s & goodies from vapeescape.

Best of luck!

[joeat]

Had enough DJ'ing with the Trustfire ,
bought me a Nitcore i4 v2 off ebay .