70%pg 30%vg nic base

[dognero]

Can't get my head around this...
I have some 70%pg 30%vg nic base 54 mg
I would like to make 30ml of 18mg strength juice but would like it to be 50%pg 50%vg.
What % of pg vg flavoring should I add.
Many thanks

[madwill]

10ml 70/30 54mg
8ml pg
12ml vg
=50/50 18mg x 30ml

Flavoring is normally pg so add some flavor instead of the pg,
1ml = 3% flavoring

so for egsample
10ml 70/30 54mg
7ml pg
1ml flavor
12ml vg
=50/50 18mg x 30ml 3% flavored

Hope this helps,

[Frogster (The Alchemist)]

Assuming your flavours are PG based, and you are using 25% flavour.... you need:
10ml of your Nic Base
0.5ml of PG
12ml of VG
7.5ml of flavours

[maccafan]

To reduce 54 to 18 it's 1:3. So for 10 ml base it's 30 ml of finished solution. You want to achieve 15 ml VG and 15 ml PG ie 50-50.

10 ml of your base contains 7ml ml PG and 3 ml VG.

So you first add 12 ml VG to above 10ml to get 22 ml of base containing 15 ml VG.

Then add 8 ml of flavouring + plain PG (if required) according to flavouring strength you need.

[Frogster (The Alchemist)]

There you go..... three answers all the same..... Next?

[dognero]

Great
Big thanks
I love this place

[Deleted]

There are calculators which will help you with this ...

www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectPath=/Shops/yxve46fvrnud/Categories/ELiquidCalc

ejuice.breaktru.com/

[dognero]

Big thanks Ash

[Deleted]

the second link is the one I use the most ... you have to remember the first top section which has the PG/VG % fields is the base you are starting with, NOT the target you are trying to mix. I use PG nic base and that I always set to 100%