Iatty

[deesigner]

Here's where I need a bit of help then Ian, my Provari says it's 2.5 ohms so what does that mean and what's safe to zap it up to?

[deesigner]

Thanks Fraser we crossed posts there, that's very helpful. Now zapped it up to 5 volts and it's amazing

[needleworks]

Jul 12, 2011 21:00:19 GMT deesigner said:

Thanks Fraser we crossed posts there, that's very helpful. Now zapped it up to 5 volts and it's amazing

Just remember, when you run at higher voltages, the battery life will suffer

If you want to lower the ohms, next time make your resistance wire just a little shorter, maybe one turn less round the wick ? that will give you lower resistance, therefore you won`t have to up the voltage as much

[deesigner]

I'm finding the battery life pretty dire anyway LOL. I'm going to have to invest in the extension bit I think and go for the better batteries

[ian]

If its reading 2.5ohms then you should be able to hit any voltage you want Dee,i aim to make my coils at about the same so i can hit the higher voltages.

[ian]

Also the extension cap makes all the difference,i get a great run time with mine using the AW IMR 18650s.I would say its essential to have unless you are a light-medium vaper.

[Dell]

well I just got mine set up.

Only vaped for 5mins but it's sensational.

The Greek one is indeed Golden - God bless him

[deesigner]

Jul 12, 2011 21:06:50 GMT ian said:

If its reading 2.5ohms then you should be able to hit any voltage you want Dee,i aim to make my coils at about the same so i can hit the higher voltages.

I've had to lower the voltage, I feel like I'm floating LOL. Can't believe I'm getting high off an ecig

[deesigner]

Jul 12, 2011 21:14:46 GMT Dell said:

well I just got mine set up.

Only vaped for 5mins but it's sensational.

The Greek one is indeed Golden - God bless him

Well done Dell Pretty darned amazing isn't it all hail King Imeo

[Lee]

I am totally impressed with the iAtty. I have a slight buzz from over vaping, might have to dig out some lower nic juice.

[Lee]

If anyone has a passthru try the iAtty on it. It will knock your socks off! I'm a bid light headed now!

I had my IAtty lying down all night to see if it leaked and pleased to say not a drop wasted. I've been out to the shops with it and it was great knowing I had juice on tap and didn't have to worry about refilling. The only worry is battery life now although I'm never out long enough for it to affect me.

This is the first real tank I've had, do clearos count? With the clearos I found the dry hits got me into the habit of doing a test draw all the time but no need with the iAtty. It has worked flawlessly since I put it together. It certainly has been money well spent in my opinion.

[ian]

All i can say is WOW,this thing is amazing.I easily made a coil in minutes and it is reading a perfect 1.5ohm on the Provai.Set the Provari to 3.3v and pressed the button.HOLY MOTHER OF GOD ;DVapour everywhere and a massive,powerful throat hit to.No leaks or problems,just a perfect vape.I agree 1000% that this system is worth every penny and more.No clearomiser tank can match the vape this beauty gives.Im soooo very glad i bought this now and this is the only tank im willing to use now.I admit to being the biggest sceptic but this is in a league of its own.Ive had the Bulli and it doesnt compare to this,I-atty is the best vape ive ever had.Only problem is i was missing an o-ring for the ceramic from my package but ive managed to secure it for now with a different o-ring.Not perfect but i will notify Cam and hopefully be able to get another.

[ian]

Could some kind person please link me to the correct no resistance wire on ebay please?I am desperate to get some more of this as im already running low.Im not confident on finding the exact one i need

[deesigner]

I can't find any on there Ian. Think I'm going to go ahead and buy a roll of each of the wires, if anyone wants any they can purchase it from me at cost. I know I'll be running out too pretty fast, as it's going to cost pennies a metre I'd rather just buy it

[deesigner]

Right I've ordered both the no resistance and the resistance.

It'll work out about 15p a metre for the .236 and 7p a metre for the 0.16 plus postage around 50p unless you want recorded which is another 75p on top.

Think it's pretty darn cheap when I look at how much I've wasted on atties!