Evod Problem,

[madwill]

I had 2 evods delivered wednesday,
Using them on a vamo@4v ish,
ss one no problems nice vape all good,
black one gargaling and rattlesnake sound coming from it,also im drinking some juice lol only sometimes,
I can rewick it just thought it was strange and didnt really want to rewick the bugger so soon,
Any thoughts?

[madwill]

Problem seems so be solved,i just put a piece of 2mm wick over the wick that was already there and its gone and tbh better than the other one now, it was obviously a flooding problem lol.

[Adam78]

nice one Will if you do get to re-wicking em try some 3mm silica wick (normal type) or 2mm ekowool (braided type). You shouldn't need the extra piece of wick on top & there won't be anything between you and the coil. I found with the extra bits of wick I was getting a bit less vapour/flavour and the odd dry hit...but better that than flooding.

[dave]

I just got an EVOD to try as well and must say I'm impressed with it so far - I reckon it compares very favourably with the Kanger T3.

[madwill]

I only have 1mm & 2mm silca ,ill probably go for 2x2mm when i do need to rewick them and see how that goes

[Adam78]

2 x 2mm might work, I was thinking of trying that myself before I got the ekowool, but as each loop of the coil will be bigger, you might find that the resistance of your coil is quite high (take longer to heat up/less vapour) especially if you're using 5 wraps of 0.20mm Kanthal. 2 x 2mm wick would probably be better with 0.30mm wire.

[madwill]

On my novas i use 2x2mm with 4 coils of .2 kanthal and it gives me 1.8ohms so ill try the same and see how i get on

[Adam78]

good to know m8, I'm about re-wick my eVod's... I'll go for 4 coils instead of 5 around the ekowool and hopefully get around 1.8 like you