Building a dual coil for anything (with pics)

[Moggy]

Mine are built using the same premade wick/coil from VB as Robby mentioned.....it was HIS suggestion to buy them

They work great in all my Nova heads, and cuts down the time taken to re-head loads.

BTW, shes a thirsty beast...

[robby]

This is my sub £4 Phoenix dripping atty from the same source double coiled, same coil source. Incredible vapour.







If you are wondering if the top of your Vamo can get hot, it can lol. This pic was taken at 15 watts on the Vamo a few minutes ago, you can put anything on the Vamo, just sucks it up ....................keeps your fingers warm too lol

[robby]

Mar 11, 2013 11:21:03 GMT Moggy said:

Mine are built using the same premade wick/coil from VB as Robby mentioned.....it was HIS suggestion to buy them

They work great in all my Nova heads, and cuts down the time taken to re-head loads.

BTW, shes a thirsty beast...

I think you will find that the heads dont pop very often with this setup either, I tend to run mine at about 10 or 11 watts, so you are only driving each coil at about 5 watts. The ones in my phoenix have been in for at least three weeks now, with the usual cleans and dry burns.

[stig1978]

Mar 11, 2013 11:48:08 GMT robby said:

This is my sub £4 Phoenix dripping atty from the same source double coiled, same coil source. Incredible vapour.







If you are wondering if the top of your Vamo can get hot, it can lol. This pic was taken at 15 watts on the Vamo a few minutes ago, you can put anything on the Vamo, just sucks it up ....................keeps your fingers warm too lol

How the hell do ya fit a double coil in that lol, i have the same dripper, i have trouble getting one coil in the dam thing. The IGO- Ls are so much easier.

[robby]

The pre made coils make it a five minute job Stig. One coil`s legs inserted either side of the posts and tighten the screw, just about the easiest thing to re coil that I have  Only 20p each coil as well.

[brysoni23]

Mar 11, 2013 12:21:56 GMT robby said:

The pre made coils make it a five minute job Stig. One coil`s legs inserted either side of the posts and tighten the screw, just about the easiest thing to re coil that I have  Only 20p each coil as well.

That dual coiled looks sweet
Ive got the same thing coming so may have to try that. Where did you get the ready made coils?

[robby]

Vaporbreak brysoni, same ones are used in the nova from mono, the OP. Sorry to hijack your thread a bit mono.

[Moggy]

Mar 11, 2013 12:33:09 GMT robby said:

Vaporbreak brysoni, same ones are used in the nova from mono, the OP. Sorry to hijack your thread a bit mono.

Always welcome fella

[lenny59]

@ Monomach

Noticed earlier your Ohms came out at 1.2ohms

I thought the vamo would not fire under 1.3ohms ? . . .Sure I read it somewhere

BTW what a great thread

[robby]

Mar 11, 2013 17:02:36 GMT lenny59 said:

@ Monomach

Noticed earlier your Ohms came out at 1.2ohms

I thought the vamo would not fire under 1.3ohms ? . . .Sure I read it somewhere

BTW what a great thread

It doesnt seem to be written in stone though lenny, I am sure I got one to fire at 1.1 ohms once due to some shorted turns on the coil

[lenny59]

Mar 11, 2013 17:07:07 GMT robby said:

Mar 11, 2013 17:02:36 GMT lenny59 said:

@ Monomach

Noticed earlier your Ohms came out at 1.2ohms

I thought the vamo would not fire under 1.3ohms ? . . .Sure I read it somewhere

BTW what a great thread

It doesnt seem to be written in stone though lenny, I am sure I got one to fire at 1.1 ohms once due to some shorted turns on the coil

So I was right......Thanks for confirming I'm not imagining things Robby

[Moggy]

Mar 11, 2013 17:29:22 GMT lenny59 said:

Mar 11, 2013 17:07:07 GMT robby said:

It doesnt seem to be written in stone though lenny, I am sure I got one to fire at 1.1 ohms once due to some shorted turns on the coil

So I was right......Thanks for confirming I'm not imagining things Robby

It says here "1.2 and less". Mine tests 1.2 9/10 times and 1.3 the rest. All I know is it fires up and sucks juice like a V8.

Additional Safety features and Functions:
• When you press the power button to use the device for 10-15 seconds or more, the device will turn off automatically.
• When a single batteries voltage is less than 3.2v or dual 18350 batteries voltage is less than 6.4v, the screen will display LO v, which indicates that the batteries need to be recharged.
• Atomizers at 1.2ohm or less, the screen will display LO ?, which indicates that you need to use a new atomizer at higher resistance.
• Atomizer short circuit the screen will display LO v.
• Incorrect battery installation protection. The device will not work circuits will be protected.
• Max current 5A
• Minimum resistance 1.2 ?
• Thermal Monitoring
• Correct Polarity Signalling
• Heavy Duty Micro-switches
• Vent Hole in Battery End Cap
• ·Battery End Cap ‘fail safe’ designed to ‘give way’
Produced by

[robby]

I had to back mine off mono, just too much vapor and then too much nic of course, possibly increasing my nic addiction.

[robby]

Mar 11, 2013 20:37:04 GMT Moggy said:

Mar 11, 2013 17:29:22 GMT lenny59 said:

So I was right......Thanks for confirming I'm not imagining things Robby

It says here "1.2 and less". Mine tests 1.2 9/10 times and 1.3 the rest. All I know is it fires up and sucks juice like a V8.

Additional Safety features and Functions:
• When you press the power button to use the device for 10-15 seconds or more, the device will turn off automatically.
• When a single batteries voltage is less than 3.2v or dual 18350 batteries voltage is less than 6.4v, the screen will display LO v, which indicates that the batteries need to be recharged.
• Atomizers at 1.2ohm or less, the screen will display LO ?, which indicates that you need to use a new atomizer at higher resistance.
• Atomizer short circuit the screen will display LO v.
• Incorrect battery installation protection. The device will not work circuits will be protected.
• Max current 5A
• Minimum resistance 1.2 ?
• Thermal Monitoring
• Correct Polarity Signalling
• Heavy Duty Micro-switches
• Vent Hole in Battery End Cap
• ·Battery End Cap ‘fail safe’ designed to ‘give way’
Produced by

Another thing I have noticed is you can get a different reading for resistance if you dont give the fire button a quick push after changing the atty.

[Moggy]

My Forest Fruits is 11mg and I can pretty much vape it all day. I noticed Vapology must need more flavouring as it isnt on the dropdown menu at the mo.