Dual coil see through mod

[bluemagnum]

Got these today and thought, these are too good to burn but could not see how much juice is left in it. Chopped it off about 3/4 of an inch up from the threads and slid it into a syringe. Then i cut another 1/2 inch off the piece i had left and slid that in the top for the drip tip. I did add some more fluval for extra juice but it seemed to flood the coil. Vapes like it should but i can now see if it's running low on juice. I might remove the top bit and cut some of the syringe down so the tip is lower.

[VE Jason]

If you want to save yourself a mod, I do have the clear ones Blue

www.vapeescape.co.uk/dual-coil-cartomiser~13

But nice job nevertheless.

[bluemagnum]

Thanks Jason, i only saw they made clear ones after i'd ordered these. When they're done, i'll have clear ones. Between these and clearo's, i'm in vaping heaven!

[VE Jason]

Must admit, I'm getting a bit partial to these myself.

I have found through trial and error that although the clear ones will take around 50 drops of liquid, it's better to put a bit less in to start with, to avoid tightening the draw too much.

Up to now though, they seem promising

[hifistud]

hmmmm... an interesting notion...

[VE Jason]

You been having problems with the draw Dave?

It may just be coincidence, but I found that when I literally filled it to the brim the draw was a lot tighter for the first hour or so until I had got through some of the liquid.

[hifistud]

I meant the notion of the clear carto... it's intriguing.

[bluemagnum]

Just ordered some from you jason, i'm impressed by these. I tried to kill one this afternoon dry burning it, i got fed up trying after it flattened the batts on my buzz and binned it!

[VE Jason]

Thanks for the order Blue.

I've spent a few days now trying them with different liquids and they seem handle anything.

[ian]

These things also work very well in a CE2 tank.Ive got mine setup in my map tank and its vaping like a charm.Just punch a small 2mm hole in the carto(approx 20mm up from the threads)add carto to the tank,fill carto and tank,add top cap and your ready to go.Bloody brilliant vape,and it gets my redundant map tank out of the drawer to.

[hifistud]

I've just ordered five (and a few other bits and bobs) - and they shall be featured on my show real soon...

[VE Jason]

On their way Dave, thanks for the order.

[bluemagnum]

May 23, 2011 9:02:47 GMT ian said:

These things also work very well in a CE2 tank.Ive got mine setup in my map tank and its vaping like a charm.Just punch a small 2mm hole in the carto(approx 20mm up from the threads)add carto to the tank,fill carto and tank,add top cap and your ready to go.Bloody brilliant vape,and it gets my redundant map tank out of the drawer to.

I was thinking about this myself this morning. After my episode yesterday trying to kill one, they should last ages in a tank. Is yours in a map or arry tank Ian?

[VE Jason]

Is there anything you won't try and fit in an Arry Tank Ian

[ian]

lol.It was actually Pancho on UKV that did it first,ive copied the idea and its mint.He has his set up in an Arry tank but ive added mine to my map tank.It vapes amazingly with huge hit and flavour of a clearomiser.Im using mine at 5v on my THVVMKI.Can vaping get any better than this?This is my best tank set up to date,im over the moon with it.One thing to remember is that the piece of metal tube in the top cap of the tank needs to be pushed up a lal bit,if your cap doesnt get a good seal on the carto top,juice will start dripping from the connector.It happened to me only once but Pancho kindly put me straight Arry has given me a method to fit my LR306 cartos to the clearomiser tank,so im trying that tonight.Will report back once ive tried it ;)Only downer is that i need the metal dual coils now,i so wanted to buy some clear ones before i hit on this dual coil tank.