Best current clearo?

[aguavape]

bauway & Vision CE4's seem to be doing the rounds again right now...

[andylec]

I just tried bauways version of the ce2, they sent me a few to test, bit of flaffing about filling with a needle bottle, but cause coil sits so high the flavour is really good.
my preferences are
the bauway ce4 for work because of good vape and cheap if i break(although there ce2 may replace this )
the evod for strong throat hits and easy to rewick
vivi tank for those chill out times with a nice drink and my sofa!
yet to try protank, thats next

[Super-Shiny]

Apr 7, 2013 0:25:29 GMT bomberharris said:

Apr 7, 2013 0:15:39 GMT 300 said:

To be honest the first thing i normally do is strip the stock wick/coil & fit my own which i haven't done yet with the evod, i'll let you know how i get on with it tomorrow.

when you rewick it do it with 5 wraps , and just before you trim the wires give them a tug and pull the coil down a little, then lay anouther peice of wick over the top of the coiled wick, it stops it from spitting fluid up the tube ;)if you do only four wraps it will prob be only 1.4 ohms, 5 wraps on the evod should come out at 1.8

That's exactly how i do mine, 5 wraps, tug and pull coil, lay another piece of wick, 1.8 or 1.9ohms.... maybe that's why me and bomber love the Evod's so much, we have found the Evod's sweet spot

I wonder if you use the same wick and coil? i use 0.20 kanthal with 3mm wick

[andylec]

Apr 7, 2013 8:59:14 GMT Super-Shiny said:

Apr 7, 2013 0:25:29 GMT bomberharris said:

when you rewick it do it with 5 wraps , and just before you trim the wires give them a tug and pull the coil down a little, then lay anouther peice of wick over the top of the coiled wick, it stops it from spitting fluid up the tube ;)if you do only four wraps it will prob be only 1.4 ohms, 5 wraps on the evod should come out at 1.8

That's exactly how i do mine, 5 wraps, tug and pull coil, lay another piece of wick, 1.8 or 1.9ohms.... maybe that's why me and bomber love the Evod's so much, we have found the Evod's sweet spot

I wonder if you use the same wick and coil? i use 0.20 kanthal with 3mm wick

ditto to above romelee but i use .2 nicocrome

[300]

Apr 7, 2013 0:10:20 GMT bomberharris said:

Apr 7, 2013 0:02:31 GMT 300 said:

8 watts is my sweet spot

its realy wierd mine vapes like a dream , a friend at work didn't like his I tryed it and it didn't seem the same as mine, ive got it here to rewick for him, it so strange yours may vape better after a rewick, but like you say we are all different. other wise we would all wear the same colour shirts lol

Well bomber i'm pleased to report that the evod is performing much better this morning after putting my own wick & coil in, the stock wick & coil weren't performing just like the one you're M8 had.

Used .20mm nichrome on 3mm wick with a single strand buffer from the offcut, 5 turns for 1.9ohms, next re-coil i'll use 1 less turn for lower ohms.

Flavour & TH both acceptable & should improve after i've run a cpl tanks through it, running it at 4.5v to get what i want from this set up & so far no problems with it keeping up but i doubt i'd be satisfied with this on a std ego battery.

Removed my tape from the 2 airholes i'd covered but put it straight back on 1 at a time & again got improved flavour & a nice tight draw.

I can also confirm that the 3mm wick Simon recommended from Terry0769 over on UKV is good, performs as good as the wick i normally use from cig-eliquid.

Overall i'm quite pleased, would be a shame to discard such a pretty little thing.

[Deleted]

No-one seemed to mention the Vapeonly BCC...

[Super-Shiny]

Forgot to mention the Vision Eternity, lovely tasting machine

[stu1873]

I have only tried the kanger mt3's and one has died already after a couple of days use. Leaking all over the place. Not impressed at all with it.
I have ordered a couple of evod's so will try them when I get them next week with my s/s Vamo V2.

Sent from my Nexus 4 using ProBoards

[esmecullen]

If I'm not using my Penelope.......I find a vivi nova or mini does the trick for me, not very keen on the Evod......mine seems to leak for some reason

I find that if I'm using my Twist, Riva or Spinner when out and about then a Rainbow Vision does the job

[ibalders]

My favourites at the moment are the Viva Nova's, Kanger's are okay but they do seem to leak over a period of time, but to stop this I stick some extra wick in, but I still prefer the taste and Vape I get of the Nova's

[Deleted]

Apr 7, 2013 12:51:44 GMT stu1873 said:

I have only tried the kanger mt3's and one has died already after a couple of days use. Leaking all over the place. Not impressed at all with it.
I have ordered a couple of evod's so will try them when I get them next week with my s/s Vamo V2.

Sent from my Nexus 4 using ProBoards

you wont have leaking i'm sure a nice vape, an evod

[robby]

I have the Kanger Protank and the iclear30, prefer the iclear I think, just a bit of a warmer vape

and then the £4 phoenix for afters lol

[bomberharris]

Apr 7, 2013 8:59:14 GMT Super-Shiny said:

Apr 7, 2013 0:25:29 GMT bomberharris said:

when you rewick it do it with 5 wraps , and just before you trim the wires give them a tug and pull the coil down a little, then lay anouther peice of wick over the top of the coiled wick, it stops it from spitting fluid up the tube ;)if you do only four wraps it will prob be only 1.4 ohms, 5 wraps on the evod should come out at 1.8

That's exactly how i do mine, 5 wraps, tug and pull coil, lay another piece of wick, 1.8 or 1.9ohms.... maybe that's why me and bomber love the Evod's so much, we have found the Evod's sweet spot

I wonder if you use the same wick and coil? i use 0.20 kanthal with 3mm wick

yes ive just done two of mine 1.7 & 1.8

[OneDay]

Thanks for the input everyone. I'm not in any way unhappy with my current devices, but always keen to know what's ticking people's boxes. I've ordered an Evod and an iClear 30 to try

[stu1873]

I have had 2 Kanger MT3's fail on me over the last 2-3 days. Won't be using them again!