Kanger Pro Tank (Dogs Doodies)

[300]

Apr 11, 2013 20:14:46 GMT richo71 said:

Apr 11, 2013 19:19:01 GMT 300 said:

Code BOARDS for 10% off

Boards is correct but you have to spend 20 euro

Buy 2 & sell 1

[djs]

My Protank is upstairs preparing for imminent propulsion out of the window (or the classifieds).

I tried blu tac. I tried glueing 2 of the air holes, I even built a "washer" out of sponge and leather.

It is awful. 4.2v on the LT, 2.0 coil, air, air, air, air, air......bl***** air.

[Adam78]

have you tried re-building it djs?

@ 1.8ohms with 2mm Ekowool wick, it's vaping like a steam train for me...not airy at all and bags of flavour.

[richo71]

Apr 11, 2013 21:02:20 GMT djs said:

My Protank is upstairs preparing for imminent propulsion out of the window (or the classifieds).

I tried blu tac. I tried glueing 2 of the air holes, I even built a "washer" out of sponge and leather.

It is awful. 4.2v on the LT, 2.0 coil, air, air, air, air, air......bl***** air.

Just a thought, not mine but pbursado stated that if it does not vape well for you to take a wick out, in total there are 3, one with the coil wrapped around it and 2 sitting on top, just pull the post off and take one out, and try that, it may be ok for you, may be not

[punisher]

@djs its the lavatube that is if your (LT) means lava tube they are known for it all my attys are airy on the LT the center pin has a slot in it allowing extra air flow to prove it drop it on an ego or any other battery they recommend a 510 sealed connector to reduce airflow

[Super-Shiny]

Apr 11, 2013 15:52:15 GMT bomberharris said:

Think Ive done better robby ive solderd mine . sorted.

Bomber, when you soldered your's did the heat damage the thread in anyway from the heat from the solder iron, i ain't got the best soldering iron and i don't wanna melt the thread in anyway.

Also how many holes did you seal?

[bomberharris]

Apr 12, 2013 20:20:18 GMT Super-Shiny said:

Apr 11, 2013 15:52:15 GMT bomberharris said:

Think Ive done better robby ive solderd mine . sorted.

Bomber, when you soldered your's did the heat damage the thread in anyway from the heat from the solder iron, i ain't got the best soldering iron and i don't wanna melt the thread in anyway.

Also how many holes did you seal?

just the one, and be carefull use just a small amount of solder

[djs]

Apr 11, 2013 22:34:29 GMT punisher said:

@djs its the lavatube that is if your (LT) means lava tube they are known for it all my attys are airy on the LT the center pin has a slot in it allowing extra air flow to prove it drop it on an ego or any other battery they recommend a 510 sealed connector to reduce airflow

t.b.h I've tried it on everything, on an ego with the plinth as tight as anything, it's still the same.

I'm considering a swap on the classifieds. It's getting me down.....

[bomberharris]

Apr 12, 2013 20:23:20 GMT djs said:

Apr 11, 2013 22:34:29 GMT punisher said:

@djs its the lavatube that is if your (LT) means lava tube they are known for it all my attys are airy on the LT the center pin has a slot in it allowing extra air flow to prove it drop it on an ego or any other battery they recommend a 510 sealed connector to reduce airflow

t.b.h I've tried it on everything, on an ego with the plinth as tight as anything, it's still the same.

I'm considering a swap on the classifieds. It's getting me down.....

aww no don't do that, block one of the holes up on the threaded tube.

[Super-Shiny]

Thanks bomberharris

[djs]

Apr 12, 2013 20:29:52 GMT bomberharris said:

Apr 12, 2013 20:23:20 GMT djs said:

t.b.h I've tried it on everything, on an ego with the plinth as tight as anything, it's still the same.

I'm considering a swap on the classifieds. It's getting me down.....

aww no don't do that, block one of the holes up on the threaded tube.

I've tried. Blue tac, glue, special-made sponge washer.....every ****** last thing.

[Adam78]

have you tried using an evod coil-unit instead of a protank one? the hole in the knurled post on an evod is much smaller

might be worth a try

[bomberharris]

Apr 12, 2013 21:10:01 GMT Adam78 said:

have you tried using an evod coil-unit instead of a protank one? the hole in the knurled post on an evod is much smaller

might be worth a try

why didn't i try that, ill try that in my next one

[Adam78]

I haven't actually tried an evod head in a protank yet (should work though) I re-built the protank coil to 1.8ohms and I switched the protank knurled post for the smaller evod one..vaping great for me

I think the 1.8ohm coil is key (the ones that came with it are 2.5ohm I think)

I'm not sure if you can buy 1.8ohm heads for the protank? you can get them for the evod though from ivapour etc.

[bomberharris]

Apr 12, 2013 21:57:50 GMT Adam78 said:

I haven't actually tried an evod head in a protank yet (should work though) I re-built the protank coil to 1.8ohms and I switched the protank knurled post for the smaller evod one..vaping great for me

I think the 1.8ohm coil is key (the ones that came with it are 2.5ohm I think)

I'm not sure if you can buy 1.8ohm heads for the protank? you can get them for the evod though from ivapour etc.

its so easy to recoil these at 1.8 . , i do prefere 1.8