What mesh for DID

[Super-Shiny]

I just got this delivered today: www.charliesvapeshop.co.uk/#/shop/4571204872/Genesis-style-rebuildable-atomizer/4197037

And wanna buy some mesh to mess around with, what mesh would you recommend from here: www.themeshcompany.com/

Don't vape tobacco liquids if that means anything, think i read somewhere that mesh is better for non tobacco tasting liquids or vice versa...not sure now ???

[lazydog]

IMHO tobacco juices are better with mesh and fruits ect.with silica but 500 or 400 mesh is good to start with but they all work. They used to do a buy a A4 and get a A4 free so if you bought 400 the free one would be 250-350 the trick is to use the thicker mesh in the center and the 400 on the outer.

[Deleted]

Some say silica for fruit and pudding liquids and mesh for tobacco, not that I noticed any difference, its also each to their own. Anyway #400 or #500 mesh will see you right

[dave]

Super-Shiny if you look in this section, you will find various sizes of suitable mesh:

www.themeshcompany.com/acatalog/25-micron-super-fine-mesh.html

The #400 stuff works fine - the bigger bit you get, the cheaper it is They used to throw in a free sheet of coarser mesh as well - supposed to be better if you use mainly VG juice, I've only used the #400 stuff though.

[Super-Shiny]

Thanks all

[number6]

Just out of interest what wire is best used.

I'm currently using 32g Kanthal A-1 resistance wire (0.2mm) and it seems to work ok, so just wondering

[Super-Shiny]

Apr 15, 2013 8:49:18 GMT number6 said:

Just out of interest what wire is best used.

I'm currently using 32g Kanthal A-1 resistance wire (0.2mm) and it seems to work ok, so just wondering

That's what i use and it seems fine