Leaking....why

[dinamic22]

Last week i bought some metal mini viva nova's for the juices that can crack the plastic tanks, a few times over the last week i have had leaks from the bottom of the clearo where it screws into the battery & also gurgling coming up through the central tube, yesterday i went for the one that has a licorice & aniseed mix in it & found quite a bit of juice in the hole of the stand, today i left that one at home while i went to work because of the leakage & when i got home & checked it all the juice had drained out of it. Obviously i tried all joints were not loose but it seems to be leaking from the bottom of the central tube, has anyone any idea why this would be happening.

[andy01424]

works on some upto you if you want to try,used it on a few leaking clearo's worked on some, drop it into some hot water ,remove after a min or so,then place in cold water,idea is heat [expand] cold [contracts]......hold no responsibilty if A it dont work B makes it worse lol

[Jen]

Sometimes this is cause by the atty head unscrewing - remove all the juice and the top and try screwing it back down. It can happen when you refill - so annoying!

[dinamic22]

Thanks Andy & Jen I'll have a look at it

[maccafan]

Just condensation/recondensed juice. I wouldn't worry about it..

All center airhole attys will exhibit this and will need wiping down from time to time.

[dinamic22]

Maccafan it was the juice that had drained out the clearo it was completely empty it had not been used

[chrisjw]

Definitely sounds as suggested.....The head is loosening off when you unscrew the top.

[maccafan]

Jul 11, 2013 17:46:52 GMT dinamic22 said:

Maccafan it was the juice that had drained out the clearo it was completely empty it had not been used

Ah ok..Did not notice that bit..

Haven't the faintest in that case as I have never used them..

[Roscopecotrain]

I will echo what Jen says, i get it with my vivi novas, always carry a little screwdriver with me now.

[dinamic22]

Cheers, I'll have a go at stripping it down & re tightening the atty this will fix the problem

[dinamic22]

Ah ok Rosco thanks