Spheroid vs Kayfun lite

[Super-Shiny]

Any ideas what is the best out of these two? and what out of the two can be purchased very quick...i.e next day or a week (don't think that can happen but worth asking)

Your thoughts most welcome

[sleepyduck]

No idea about the spheroid, but the KFL is a terrific thing

Dunno where you can get one at the moment though

That wasn't very helpful, was it?

[Perpetua]

Haven't got a Kayfun Rom . . . but I do have a couple of Spheroid's, love them.


Absolute doddle to coil up, did mine on Sunday, took me longer to cut the wick and wire than do the actual deed . . . the secret ( I think anyway ) is getting the amount of foam/filler right in it. I use blue foam from James at PV.

My piece that fits best, I use as a template. Though I've not needed to cut anymore than 2 bits as I just rinse them out when I change flavour.

[Mev]

I have both and would say the vape is very similar, but of course the size comes into it with the Kayfun lite holding more juice and being much larger. If you're looking for one to fit on a 22/23 mm mod then I'd say go for the Kayfun Lite, vice versa if you'll want to use it on a smaller mod at times.

[Deleted]

I have a Spheroid and a Kayfun 3.1 ... not a lite

Difference for me is the Kayfun is a bit airier and smoother whilst the Spheroid is a beast. Flavour is great on both. Comparing different things here but the Kayfun is my go-to tank system.

I love them both but for different reasons. Kayfun doesn't give me the hit like a Spheroid does. It's a man's atty.

As Mev says, Spheroid can look a bit weird on a larger mod ... and a Kayfun looks equally daft on a smaller mod

c9v for the kayfun or www.vapistsvapourizers.co.uk/ for the spheroid unless you hawk the classies. Spheroids come out in batches every 2-3 months

I use my Kayfun on an EA Mod and my Spheroid on all manner of devices. Looks kinda funky on an MVP

Either work well with baccys or non-baccy's

[blakey]

I have owned both atties, I no longer own the spheroids

The vape quality of the spheroid is by no means inferior to the kayfun lite but the juice capacity is, as is the ability to refill without getting juice on your fingers
Form factor plays a part too, the spheroid is about the same diameter as an ego twist whereas the kayfun is 22mm in diameter so the mod you intend to put either attie on will be important.
Re-wicking is pretty much equal faff on both atties- very simple.
The foam filler in the spheroid can be a complete pita if you vape juices of different consistencies, the right amount of filler to allow proper wicking of your 60-40 mix will not be the same as your 50-50 mix and so on. It was also my experience that the spheroid, if left upright over night tended to flood juice into the chamber below the wick which caused gurgling.

The down side to the kayfun lite is you need a screwdriver to remove the re-filling screw to refill and you may find the draw a little too airy, I put a little rolled up mesh into the air intake of mine to tighten up the draw a little and I find that if you refill the tank before you go out it'll be unlikely that you'll need to refill again before you get home.

The spheroid is a superb vape with full on flavour but I don't regret selling mine and purchasing more kayfuns.


The kayfun can be purchased from here www.intaste.de/Selbstwickel-Verdampfer/SvoeMesto/Kayfun-Lite::1939.html?MODsid=0680d291ccb3df7abc1bd500b11a0a3b till cloud 9 re-opens or here www.digitalsteam.de/

The spheroid from here www.vapistsvapourizers.co.uk/GP_Spheroid_V2_Rebuildable_Atomizer/p1436124_7875548.aspx or here www.vapourart.com/en/product-catalog/29

Both atties are stock depending though

[Super-Shiny]

Jul 23, 2013 20:26:30 GMT Mev said:

  If you're looking for one to fit on a 22/23 mm mod then I'd say go for the Kayfun Lite

Yep it's the 22/23mm i would be looking to use it on so the Kayfun looks to be the winner for me, i will be using it for my long vaping sessions, i only use my twists for outdoor use anyway.

Next thing is where can i get one quick? (I have the worst patience in the world)

[jcol]

Hi Romelee, glad to see you back from your hols
I have seen some members get some Kayfun Lites from Germany, delivery is usually 2-3 days, think it comes to about £70
here you go link

[Super-Shiny]

Forgot to ask blakey & @ashmal (don't know if you have these mods), with the Kayfun light is there a gap when fully screwed onto a eVic and SVD flush? i cannot be doing with gaps (ocd thingy)

[kirrielad]

No gap on the SVD rom, there's a slight overhang tho.

[blakey]

Neither atties have an adjustable center pin.
The kayfun is too wide for a standard evic top cap unless you have something like a siam mods top cap which is 22mm. Not a problem if you don't mind a little overhang.
Both atties will sit flush though as long as the evics 510 connector isn't sitting proud.

[Mev]

I've got a Semovar you could possibly buy to go with the Kayfun..

[digicig]

I have both - i seem to prefer using the KFL generally, but definitely the Spheroid for out and about - unless close and Vape Friendly

The Russian 91% looks good according to Todd - the KFL size with airflow control and £60

[Super-Shiny]

Jul 23, 2013 21:15:13 GMT kirrielad said:

No gap on the SVD rom, there's a slight overhang tho.

Oh well that is the SVD out of the window, looks like it will be for the eVic

[Super-Shiny]

Jul 23, 2013 21:16:29 GMT blakey said:

The kayfun is too wide for a standard evic top cap unless you have something like a siam mods top cap which is 22mm.

Got one of these so should be ok then: www.joyetech.com/product/details.php?gno=138