Mini protank not working?

[lal]

Had been working fine, cleaned it last night. Put it on my spinner, started ok, but after a couple of vapes - nothing. Tried it on another battery, nothing. Any ideas?

[DiscoDes]

Make sure the coil head is screwed into the base properly.

[lal]

Will do, when I get a chance!

[DiscoDes]

invert your ecig, take the base off and just twist the coil head to make sure its screwed into he base ok, they have a habit of becoming loose.

[super7]

Also sometimes the little pin that slides into the rubber grommet (in the base of the head) needs pulling out a bit, as it is not making contact with the + in the battery. Just tease it out a bit, with your finger nail. I have to do this with a pro tank, after I have rebuilt the head.

[lal]

Thanks folks, in work at the moment, so will try the above when I get 5 mins

[lal]

Nope still not working, will try a new head when I get home x

[scaffman69]

Turn the screw iff it has one, anti clockwise half a turn were it connects to the battery, they sometimes move and tighten breaking the connection as you keep using and screwing them on to your batteries and clean the battery connector with a cotton bud.