Timbo
Senior Member
Joined:June 2013
Posts: 315
Location:
Likes: 100
Recent Posts
Last Online Dec 5, 2020 7:41:55 GMT
|
Post by Timbo on Aug 9, 2013 16:39:20 GMT
I thought they were the same. I thought I would treat myself to my first pyrex glass tank. The other one was linked as well.
|
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on Aug 9, 2013 16:51:05 GMT
'The left part should go over the cartomizer and the hole on it should line up with the hole on the cartomizer, as for the drip tip put that on last once you are ready to use it.' See this is the problem When the left part is screwed in the hole is to low to match the other hole Also there is a gap on the inside, it is not flush so it just fills up, probably why it would not work. That tube on the left is only there to secure top and bottom caps. The hole is to let juice in and the gap around the carto and middle tube should fill up with juice so it gets to the hole in the carto. At a guess if you say the carto flooded then maybe try another following the vids above on filling. Sent from my Galaxy Note 2
|
|
Timbo
Senior Member
Joined:June 2013
Posts: 315
Location:
Likes: 100
Recent Posts
Last Online Dec 5, 2020 7:41:55 GMT
|
Post by Timbo on Aug 9, 2013 16:52:44 GMT
Ok I will give it another shot. So it does not need to be lined up with the hole? Even though its impossible, just wanted to make sure the cartomisers are the right ones.
|
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on Aug 9, 2013 16:53:36 GMT
Are you using the correct size middle tube with the correct size tank with the correct size carto to match the previous two? As it comes with 2 tanks and 2 middle tubes. Sent from my Galaxy Note 2
|
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on Aug 9, 2013 16:54:27 GMT
Ok I will give it another shot. So it does not need to be lined up with the hole? Even though its impossible, just wanted to make sure the cartomisers are the right ones. Not if there is a gap between middle tube and carto as that then fills up and feeds the carto juice. Sent from my Galaxy Note 2
|
|
Timbo
Senior Member
Joined:June 2013
Posts: 315
Location:
Likes: 100
Recent Posts
Last Online Dec 5, 2020 7:41:55 GMT
|
Post by Timbo on Aug 9, 2013 17:04:30 GMT
Are you using the correct size middle tube with the correct size tank with the correct size carto to match the previous two? As it comes with 2 tanks and 2 middle tubes. Sent from my Galaxy Note 2 Both of the tubes don't line up. I will give it another shot and report back Thank you for the help.
|
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on Aug 9, 2013 17:06:13 GMT
Are you using the correct size middle tube with the correct size tank with the correct size carto to match the previous two? As it comes with 2 tanks and 2 middle tubes. Sent from my Galaxy Note 2 Both of the tubes don't line up. I will give it another shot and report back Thank you for the help. What do you mean line up? Sent from my Galaxy Note 2
|
|
Timbo
Senior Member
Joined:June 2013
Posts: 315
Location:
Likes: 100
Recent Posts
Last Online Dec 5, 2020 7:41:55 GMT
|
Post by Timbo on Aug 9, 2013 17:17:24 GMT
The holes do not line up.
|
|
Super-Shiny
Super Member
SUSPENDED
Joined:January 2013
Posts: 13,131
Location:
Likes: 10,308
Recent Posts
Last Online Nov 25, 2014 19:31:22 GMT
|
Post by Super-Shiny on Aug 9, 2013 17:20:50 GMT
The holes do not line up. I take back what i said earlier about the tube holes lining up with the carto, don't think it matters, think the holes are there just to let juice in
|
|
Timbo
Senior Member
Joined:June 2013
Posts: 315
Location:
Likes: 100
Recent Posts
Last Online Dec 5, 2020 7:41:55 GMT
|
Post by Timbo on Aug 9, 2013 17:30:11 GMT
I got it working, thought great, no throat hit but that is probably because I put in a 50/50 ratio. Put it down for ten minutes, went back to it, back to square one again. The carto is drenched, took hot liquid in my mouth. Glad I only payed £1.50 for the e liquid because its spilling everywhere lol!!
|
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on Aug 9, 2013 19:38:58 GMT
I got it working, thought great, no throat hit but that is probably because I put in a 50/50 ratio. Put it down for ten minutes, went back to it, back to square one again. The carto is drenched, took hot liquid in my mouth. Glad I only payed £1.50 for the e liquid because its spilling everywhere lol!! When you fill the tank up do you use a needle tip? Sent from my Galaxy Note 2
|
|
Timbo
Senior Member
Joined:June 2013
Posts: 315
Location:
Likes: 100
Recent Posts
Last Online Dec 5, 2020 7:41:55 GMT
|
Post by Timbo on Aug 11, 2013 10:17:21 GMT
Yes I used a needle tip. Do you suggest I contact the vendor?
Tempted just to send it back. I do not like just giving up but it is a bit of a mess each time I give it ago!
I thought the first time was because I over filled it. The second time was 60% full as suggested, and it still leaked.
|
|
Timbo
Senior Member
Joined:June 2013
Posts: 315
Location:
Likes: 100
Recent Posts
Last Online Dec 5, 2020 7:41:55 GMT
|
Post by Timbo on Aug 11, 2013 18:33:03 GMT
Ok so I have now been vaping on this bad boy for around an hour now. No leaks so far. I think the problem was the air pressure. I decided to fill it up without using the hole and so far so good.
|
|
Super-Shiny
Super Member
SUSPENDED
Joined:January 2013
Posts: 13,131
Location:
Likes: 10,308
Recent Posts
Last Online Nov 25, 2014 19:31:22 GMT
|
Post by Super-Shiny on Aug 11, 2013 18:35:08 GMT
Got there in the end Timbo
|
|