Just recieved the eVic

[melitahams]

i just recieved the eVic moments ago wowow its a big device I just tried it a little but need to charge the batteries well I'm very happy  . Do I need to update it ? as I still didn't connect it with the com yet.I will read the manual.

[Super-Shiny]

melitahams you will need: www.joyetech.com/support/down_nr.php?id=46&k=1

Just noticed it's a new version

[melitahams]

I let you Know Romelee as its still at 42% charging as soon as its done I plug it to the com. I already downloaded MVR.The 1.4 is only a multi  language 

[Dan]

Congrats on your purchase!

I liked my first evic so much that I bought a second one a month later.. use them both daily and love 'em!

They do seem a little large to begin with but I find that they're just right now..

[george]

I got my Evic 3 days ago and this is my first mod and it is great.

[melitahams]

Ok first battery is charged,filled up the vivi nova with Ry4 as its 2 weeks in steep and started vaping now some few questions
1: I can see the version is 1.4 is it ok?
2: If the coil is 2.4 and I set it will more volts/watts will it damage the coil?
3: When I used it the first time I could see the watts/volts used but now no how can I make them appear again?
4: Right now on the display I can see 5.7w 2.4 (guess is the coil) and the 3.7 V why is it that it appear 5.7 W in watts not in volts is there something I should set?
Thanks

[Super-Shiny]

Aug 17, 2013 16:18:23 GMT melitahams said:

Ok first battery is charged,filled up the vivi nova with Ry4 as its 2 weeks in steep and started vaping now some few questions
1: I can see the version is 1.4 is it ok?
Yes
2: If the coil is 2.4 and I set it will more volts/watts will it damage the coil?
If you go too high you will burn the wick and get a burnt taste, adjust until you think you have the right vape
3: When I used it the first time I could see the watts/volts used but now no how can I make them appear again?
Hold the dial too the right and it will scroll through the following: Volts - Watts - RVV - RVW1 - RVW2 - RVW3
4: Right now on the display I can see 5.7w 2.4 (guess is the coil) and the 3.7 V why is it that it appear 5.7 W in watts not in volts is there something I should set?
See 3
Thanks

Also if you hold the dial too the left it will scroll through the different displays.

Hope this helps

[melitahams]

Aug 17, 2013 17:31:04 GMT Super-Shiny said:

Aug 17, 2013 16:18:23 GMT melitahams said:

Ok first battery is charged,filled up the vivi nova with Ry4 as its 2 weeks in steep and started vaping now some few questions
1: I can see the version is 1.4 is it ok?
Yes
2: If the coil is 2.4 and I set it will more volts/watts will it damage the coil?
If you go too high you will burn the wick and get a burnt taste, adjust until you think you have the right vape
3: When I used it the first time I could see the watts/volts used but now no how can I make them appear again?
Hold the dial too the right and it will scroll through the following: Volts - Watts - RVV - RVW1 - RVW2 - RVW3
4: Right now on the display I can see 5.7w 2.4 (guess is the coil) and the 3.7 V why is it that it appear 5.7 W in watts not in volts is there something I should set?
See 3
Thanks

Also if you hold the dial too the left it will scroll through the different displays.

Hope this helps

Sure It helps Thanks Romelee. What I actually mean in num 3 is when I press the button to vape it use to show something like seconds or volts used now not is there a setting to make that ? 

[Super-Shiny]

melitahams open up the software and plug you eVic in and connect via the software, then click on Vapor Set then click on HomeScr and make any changes you want for the screen and click on Modify.

You can also change the timings, go to Configuration and make any changes you want and then click on Modify.

It's a lot easier to do any changes to the eVic via the software.

[melitahams]

Aug 17, 2013 18:04:32 GMT Super-Shiny said:

melitahams open up the software and plug you eVic in and connect via the software, then click on Vapor Set then click on HomeScr and make any changes you want for the screen and click on Modify.

You can also change the timings, go to Configuration and make any changes you want and then click on Modify.

It's a lot easier to do any changes to the eVic via the software.

I been and yes it quite easier to make changes there but I still cannot see and get what I so maybe bc I updated the Evic and it doesn't show anymore? Thanks for replying and making you crazy
If you look to this video www.joyetech.com/support/down_video.php?no=37&k=8 at the 3.41 time you can see what I mean 

[alansi]

melitahams here is some orientation how to set up power for optimal vaping:

[melitahams]

Aug 17, 2013 18:29:32 GMT alansi said:

melitahams here is some orientation how to set up power for optimal vaping:

Wow those are certainly lots of numbers  let me see if I get well ,at the moment I have a 2.2 coil so that means that I have to set the Volts from 3. to 4.2 right?

[Super-Shiny]

melitahams 4.2 volts or 8 watts should be fine.

Maybe even higher, best to keep messing around with it until you find your sweet spot.

[jcol]

Yep.
Personally i use the VW on my Evic, just set the wattage and the Evic works out the voltage automatically afaik.
I usually vape at 6.5w-9.0w depending on Clearo and/or juice

[melitahams]

Aug 17, 2013 18:40:00 GMT Super-Shiny said:

melitahams 4.2 volts or 8 watts should be fine.

I just place it in the middle 3.7