First rsst wick and coil

[gapy360]

Omg I've done it. Got the rsst working on the Magneto. Got a massive gap because it won't screw down but screwed down the centre pin so it connects (needs must!)
So first wick with 500 mesh and. 2 kanthol. Took ages to pulse to get it glowing properly (and 4 popped coils due to too high a battery charge) but got there and then filled. Produces sooooooo much vapour and boy is it a smooth vape. Flavour is better too.
I read loads of posts on here to get me there so thanks to everyone that has commented on a rsst coil thread you've all helped me take my next step on the vape ladder!
Now I've just got to sort out why it won't screw done properly.

[testdruif]

well done!
and I hope you get a lot of vapetime out of it

[kailey]

There will be no holding you back now. Well done!

[gapy360]

Thanks guys, am really enjoying the quality if the vape, and the flavour is amazing, so much more than my protank, I just wish I could carry it around with me all day, but it's not really pocket friendly!

[markm]

The centre screw is adjustable, just turn it anti clockwise, if you carefully
Take the coil wire off first then you ill probably get way with tucking it back in
After you have it adjusted.

and congrats on the coil, the first is always special, so I would enjoy it for a
a it before risking the adjustment.

[gapy360]

Aug 31, 2013 8:48:04 GMT markm said:

The centre screw is adjustable, just turn it anti clockwise, if you carefully
Take the coil wire off first then you ill probably get way with tucking it back in
After you have it adjusted.

and congrats on the coil, the first is always special, so I would enjoy it for a
a it before risking the adjustment.

Thanks markm, the problem seems to be the threads between the rsst and the magneto, it just wont screw down. Almost like the thickness/depth of the threads, as a vendor have you heard of this before? Its so frustrating as it looks mint when ive seen it screwed fully down

[Roscopecotrain]

Aug 31, 2013 10:09:07 GMT gapy360 said:

Aug 31, 2013 8:48:04 GMT markm said:

The centre screw is adjustable, just turn it anti clockwise, if you carefully
Take the coil wire off first then you ill probably get way with tucking it back in
After you have it adjusted.

and congrats on the coil, the first is always special, so I would enjoy it for a
a it before risking the adjustment.

Thanks markm, the problem seems to be the threads between the rsst and the magneto, it just wont screw down. Almost like the thickness/depth of the threads, as a vendor have you heard of this before? Its so frustrating as it looks mint when ive seen it screwed fully down

Sorry gapy but like this


You must have dodgy threads on either the magneto or rsst.

Sent from my Galaxy Note 2

[markm]

Sounds to me like the female thread may not have been cut to sufficient depth, or is faulty
At the deep end.

[gapy360]

Aug 31, 2013 10:38:02 GMT markm said:

Sounds to me like the female thread may not have been cut to sufficient depth, or is faulty
At the deep end.

On the Magneto? If it is I'll get in touch with the vendor on Monday and see about a replacement it's really annoying! Thanks for the advice, I love this forum, everyone is always so helpful

[markm]

Aug 31, 2013 11:10:55 GMT gapy360 said:

Aug 31, 2013 10:38:02 GMT markm said:

Sounds to me like the female thread may not have been cut to sufficient depth, or is faulty
At the deep end.

On the Magneto? If it is I'll get in touch with the vendor on Monday and see about a replacement it's really annoying! Thanks for the advice, I love this forum, everyone is always so helpful

That would be my best guess, not seen a magneto in the flesh so can't advise on it.
you should bear in mind that not all mod/atomiser combinations will fit together in a way you might like.
take a look at some of Todds reviews, he finds combination issues with some things all the time.

[gapy360]

This is how it SHOULDNT look