Ohm meter

[Deleted]

Sept 3, 2013 8:39:29 GMT ginge7289 said:

No problems @freefromsmoking, I like the look of it, some people have built it in bigger boxes so they can store all their wick and wire in there to. The only thing that will make it cost more is the postage

I agree ginge7289 all those individual royal mail charges would double the cost.  Have you looked into how much the postage would be to import from the USA? OR raise a ticket with Fasttech asking them to stock it - if you give them a link to another supplier they do their best to stock it at a lower price.

[Super-Shiny]

Get yourself one of these for £24.44 and you get both a mod and tester

www.fasttech.com/products/0/10004594/1370201-innokin-itaste-svd-telescoping-variable-voltage-e

[ginge7289]

I already have my Zmax Super-Shiny but its a gadget lol and Im a sucker for gadgets

[blakey]

Cheers raid, I used mine to set up both my Kick2s so that they were pushing out 8w - 4v through 2 0hms UNDER LOAD
So impressed that I went to town, I calibrated my 4 mk1 kicks then checked the under load output of my vamos only to find they they were suffering from voltage drop
The provari is pushing out exactly what the display says it should be pushing out under load and so are the evics
The nemesis suffers a slightly less power drop than the paps and the GGTS needs a damn good clean


Very happy with your little gizmo

[Super-Shiny]

Sept 3, 2013 11:17:40 GMT ginge7289 said:

I already have my Zmax Super-Shiny but its a gadget lol and Im a sucker for gadgets

Found this, cannot remember where though:



Don't think it can be that hard to do

[Mev]

Sept 3, 2013 6:30:38 GMT ginge7289 said:

one hour of work, and here's what we have :scratch: 510 conector, 9v battery, omh meter, switch, and diy box +- £10

Omh Meter £6.54 www.ebay.co.uk/itm/180688890508?s...1497.l2649

Switch £1 www.ebay.co.uk/itm/2-Pcs-4-Pin-3V...43bbc1a070

Diy box £3.78 www.ebay.co.uk/itm/261168658631?v...1497.l2649

Battery £1 www.ebay.co.uk/itm/5-x-DURACELL-P...5aefe4a33d

510 conector £3.50 www.stealthvape.co.uk/e-cigarette...r-with-nut

If buying everything here about £15

They've made a very good OHM reader but paid about 300% going rate for the hardware (other than meter).
Is raid thinking of making these ones, If there is enough people wanting these I could source the hardware from my suppliers for the group and have them shipped to raid or who ever is making them. It would save a few quid.

[blakey]

I'd be up for one of them

[ginge7289]

Or you could get the parts from your supplier Mev then sell them as kits? Then people can source there own boxes?

[Mev]

I'm just going to look around and see if I can get the meters cheaper anywhere, if so i'll add up the cost for all hardware.

[ginge7289]

Any joy Mev

[Mev]

got the meter guy down to £5 per meter so far, trying to get a bit more off and make sure he'll mark at a price to skip past customs ok..
Can already get the boxes, switches etc elsewhere cheaper.

[raid2506]

Sept 4, 2013 22:41:42 GMT Mev said:

got the meter guy down to £5 per meter so far, trying to get a bit more off and make sure he'll mark at a price to skip past customs ok..
Can already get the boxes, switches etc elsewhere cheaper.

It's the cost for the panel meters that have been stopping me going down this route.

Would be very interested at a good price though.

[Mev]

He's trying the old chestnut of not making any profit on them but i'm sure in China they are less than £1 lol

[Dan]

As easy as it is using my mods to test resistances I would love one of these..

Just don't wanna get one from america Tease-smiley

Sure I'm not the only one either!

[kailey]

Sept 5, 2013 0:32:56 GMT Dan said:

As easy as it is using my mods to test resistances I would love one of these..

Just don't wanna get one from america Tease-smiley

Sure I'm not the only one either!

No, not the only one. I've been looking for one of these in the UK too. Sadly it is beyond my capabilities to make my own.