RSST build options?

[markm]

Sept 5, 2013 11:21:24 GMT raid2506 said:

I feel a short coming on.

Make mine a large malt please  

[Village idiot formerly tjlumle]

Is there any vids for wicking with ekowool for this?

[Roscopecotrain]

Sept 14, 2013 1:46:47 GMT Village idiot formerly tjlumle said:

Is there any vids for wicking with ekowool for this?

I did not find any tj, even ones with silica were few and far between

[Village idiot formerly tjlumle]

Thanks Rosco. I am going to have another go at recoiling today think I may have strangled the wick slightly by coiling to tight but will find out today.

[Roscopecotrain]

Sept 14, 2013 9:46:11 GMT Village idiot formerly tjlumle said:

Thanks Rosco. I am going to have another go at recoiling today think I may have strangled the wick slightly by coiling to tight but will find out today.

No probs tj, i am waiting on some more silica and ekowool to give that a go in the rsst.

[Village idiot formerly tjlumle]

I have 2mm and 3mm ekowool and 2mm and 3mm silica to try. Was thinking of ordering some mesh but just waiting feedback from another thread regarding a reccomendation as to which mesh to buy

[Roscopecotrain]

Sept 14, 2013 9:49:53 GMT Village idiot formerly tjlumle said:

I have 2mm and 3mm ekowool and 2mm and 3mm silica to try. Was thinking of ordering some mesh but just waiting feedback from another thread regarding a reccomendation as to which mesh to buy

Mesh sounds like a lot of hassle lol, i was thinking steel rope.

[Village idiot formerly tjlumle]

Sept 14, 2013 9:54:01 GMT Roscopecotrain said:

Sept 14, 2013 9:49:53 GMT Village idiot formerly tjlumle said:

I have 2mm and 3mm ekowool and 2mm and 3mm silica to try. Was thinking of ordering some mesh but just waiting feedback from another thread regarding a reccomendation as to which mesh to buy

Mesh sounds like a lot of hassle lol, i was thinking steel rope.

From the Phil B video it didnt seem that much hassle, So wouldnt mind trying. Let me know hot the steel rope goes though as if it is any good might be a good learning curve as still learning and last night was my first ever build

[gapy360]

I've been using 500 mesh in mine and it works a treat if that's any help

[Village idiot formerly tjlumle]

Sept 14, 2013 10:33:43 GMT gapy360 said:

I've been using 500 mesh in mine and it works a treat if that's any help

Did you buy from here?
www.vape-atomizer-mesh.com/products/Ekowool.html

[gapy360]

Sept 14, 2013 11:48:53 GMT Village idiot formerly tjlumle said:

Sept 14, 2013 10:33:43 GMT gapy360 said:

I've been using 500 mesh in mine and it works a treat if I hat's any help

Did you buy from here?
www.vape-atomizer-mesh.com/products/Ekowool.html

I actually got lucky and when I bought the rsst off the classified he through in some mesh. I normally get my silica and wire from Stealth vapes, but I've also heard people on here talk about the mesh company. I personally have not heard or used of the one you have mentioned so could comment, sorry. But I found Stealth vapes very good and quick, they have a website and also sell on ebay

[Village idiot formerly tjlumle]

Thanks gapy360

[gapy360]

Sept 14, 2013 12:05:16 GMT Village idiot formerly tjlumle said:

Thanks gapy360

Just updated my post with the correct words! Damn predictive text. I meant to say I had Not heard of the one you mentioned but hope you got that gist and it was of some help.
The biggest prob I had was after wrapping the coil was pulsing the wick/power, make sure if you're on a mech mod the battery is only at 3.7v charge or, like me you will pop the coil! And take your time, there is no race!

[Village idiot formerly tjlumle]

I was gonna try on a vamo or an svd would that be ok?

[Village idiot formerly tjlumle]

Sorry for taking over the thread