RBA to fit inside carto tank?

[chykensa]

Hi all
Am I right in thinking that I have seen a rebuildable atomiser which fits inside a carto tank? Sure I've seen one somewhere but have no idea what it's called, or where I can get one.
Could anyone who knows please post a link, and also any advice on the ease of use and durability of said item would be most welcome.
Thanks in advance
Andy

[Fallen Angel]

There two that I know of the diver :-
www.atmistique.gr/index.php?page=shop.product_details&flypage=flypage_images.tpl&product_id=480&category_id=75&vmcchk=1&option=com_virtuemart&Itemid=76

And the K1 :-
greyhaze.co.uk/collections/rba/products/k1-rba-for-carto-tanks

As to how good they are I know of a review by Tod on the diver but not the second one sorry

[greendollar]

you have the killer www.digitalsteamuk.co.uk/atomizers/cartomiser/the-killer-705-by-leo-rebuildable-cartomizer-stainless-steel.html or the www.digitalsteamuk.co.uk/diver-rebuildable-cartomizer-stainless-steel.html

both get pretty good reviews

[chykensa]

That's great greendollar and Fallen Angel - thanks for the links, I'll have a good look at these.
Anyone got any experience using them?

[blakey]

I have experience of all 3 of them

The diver would be my choice
The killer gives an equal vape but that juice control can be a pain in the ass tbh
The K1 is a not so good clone of the killer


I'm currently running a diver in a billet box and another in a scuba tank, the killers and the K1s are sitting in a box

[greendollar]

I've had the Killer 705 which was a great vape when set up , the only issue I had was that I couldn't get the hang of refilling the bloody thing without making a mess & getting the juice flow right again

[chykensa]

blakey - thanks for that, I'm just a bit worried about the fragility of the ceramic. Am I being a bit silly here?
Might wait for payday and then have a good look - still have to treat myself for my 1 year anniversary!!

[blakey]

Sept 22, 2013 11:09:20 GMT chykensa said:

blakey - thanks for that, I'm just a bit worried about the fragility of the ceramic. Am I being a bit silly here?
Might wait for payday and then have a good look - still have to treat myself for my 1 year anniversary!!

If you don't mistreat that ceramic it will last a fair good while mate, they are very very easy to set up BUT they do require resistance to no resistance wiring. Ready made can be bought extremely cheaply though greyhaze.co.uk/collections/accessories/products/no-resistence-to-resistence-coil-wire-ready-made

All 3 of the atties above use the same ceramic

[Balllsy]

Sept 22, 2013 11:07:01 GMT blakey said:

I have experience of all 3 of them

The diver would be my choice
The killer gives an equal vape but that juice control can be a pain in the ass tbh
The K1 is a not so good clone of the killer


I'm currently running a diver in a billet box and another in a scuba tank, the killers and the K1s are sitting in a box

I've been stalking the billet box site and their Facebook page, but the damn thing is never in stock. When did you get yours Blakey ? Also asked them for a stock update on Facebook but they didn't reply grrr.

[blakey]

Sept 22, 2013 11:19:17 GMT Balllsy said:

Sept 22, 2013 11:07:01 GMT blakey said:

I have experience of all 3 of them

The diver would be my choice
The killer gives an equal vape but that juice control can be a pain in the ass tbh
The K1 is a not so good clone of the killer


I'm currently running a diver in a billet box and another in a scuba tank, the killers and the K1s are sitting in a box

I've been stalking the billet box site and their Facebook page, but the damn thing is never in stock. When did you get yours Blakey ? Also asked them for a stock update on Facebook but they didn't reply grrr.

Keep stalking that site mate, that's all you can do- I adore the little bugga

With a diver inside it performs up there with everything else I own and nothing comes more pocket friendly

[stu1873]

I have a Diver (flangeless) and a K1 (Killer clone).

I have not had much luck with the Diver in my AGR+ tank, keeps flooding out of the centre post when the tank is filled more than half way full. I had a bit better luck pushing the diver through the tank to fill it up with a syringe and needle rather than the tiny fill hole but it still leaked a few drops after leaving it stand for a bit.

The K1 was a bugger to get set up but once i got it ok then it was pretty good in an X8 tank. I do think it was shorting from the centre pin now and again after adjusting then juice control though.

I just wish i could get my Diver to perform like others seem to be getting as it's not getting used at all now.

[blakey]

Sept 22, 2013 11:27:57 GMT stu1873 said:

I have a Diver (flangeless) and a K1 (Killer clone).



I just wish i could get my Diver to perform like others seem to be getting as it's not getting used at all now.

The main cause of flooding in a diver is the wick touching the hole in the side, if this happens it just continuously draws juice inside- make sure the wick is a good 45 degrees away from that hole

[stu1873]

I made sure that the wick was 90 degrees in position to the hole in the sleeve the last time i built it mate. I am not sure if it's because of the centre post that holds my AGR+ tank together is affecting how the pressure inside the Diver works with regards to juice flow.

[Pezz]

Sept 22, 2013 11:25:59 GMT blakey said:

Sept 22, 2013 11:19:17 GMT Balllsy said:

I've been stalking the billet box site and their Facebook page, but the damn thing is never in stock. When did you get yours Blakey ? Also asked them for a stock update on Facebook but they didn't reply grrr.

Keep stalking that site mate, that's all you can do- I adore the little bugga

With a diver inside it performs up there with everything else I own and nothing comes more pocket friendly

Billet box & diver set up is one that I've been wanting.

I've seen too much good stuff written about both that I think it has to be a great vape.

Did you see the prototype he did with wooden panels?

[blakey]

Sept 22, 2013 11:39:18 GMT Pezz said:

Sept 22, 2013 11:25:59 GMT blakey said:

Keep stalking that site mate, that's all you can do- I adore the little bugga

With a diver inside it performs up there with everything else I own and nothing comes more pocket friendly

Billet box & diver set up is one that I've been wanting.

I've seen too much good stuff written about both that I think it has to be a great vape.

Did you see the prototype he did with wooden panels?

I did, maybe this is the new revision he mentions on the site