2.2 premade res/no res wires for 1.5/1.8?

[inigomontoya]

Hi guys,

Ordered some res/no res wires, realised I would rather try some lower ohm stuff to test out. would anyone swap 1.8 or 1.5 for my 2.2? Or even split a pack with me if you also want to try the higher resistance?

Trying to compare different resistances on my euforia. 

[OneDay]

What have you got the Euforia on top of? I ask because if you have vv or vw you can compensate for the different coil resistances?

[inigomontoya]

A spinner, but I don't feel like I'm getting the best out of it - might just be my coil.

[chrisjw]

I've ordered 50 x 1.8 ohm ready made ones, but they haven't arrived yet.....If you still want to swap a few when they get here, I'm more than happy to..........

[Super-Shiny]

Cannot see it being the coil, are you using Ekowool or Silica? i tried silica and didn't like it so i changed to Ekowool, also with the 1x2mm Ekowool with another 1x2mm Ekowool on top where the coil is made a lot of difference for me.

[inigomontoya]

Sept 23, 2013 14:26:48 GMT inigomontoya said:

Sept 23, 2013 14:18:51 GMT Super-Shiny said:

Cannot see it being the coil, are you using Ekowool or Silica? i tried silica and didn't like it so i changed to Ekowool, also with the 1x2mm Ekowool with another 1x2mm Ekowool on top where the coil is made a lot of difference for me.

Ekowool. I'm still getting over the learning curve a bit with it as it does act differently to normal silica (or maybe I'm just not treating it right). I still need to get a torch as I think torching rather than using a bic would be cleaner. Do need to rebuild with the extra bit on top as per your previous recommendations though as well.

I personally think it could be a combination of not being used to the material and the coil, as I was getting a mix of burnt hits at 3.8, so I will have another go and sort it out a bit. potentially getting hot spots under the coil where I can't see them.

Sept 23, 2013 14:07:40 GMT chrisjw said:

I've ordered 50 x 1.8 ohm ready made ones, but they haven't arrived yet.....If you still want to swap a few when they get here, I'm more than happy to..........

I reckon I would still like to have options to play with, so if you're up for it let me know when they arrive and we could discuss swapping a few. Thanks

[Super-Shiny]

inigomontoya piccy of exactly how i do mine for the Euforia: