Kick knacked?

[Pezz]

Evening all.

After four rebuilds I have finally got my new Fogger working.

2.5ohm with cotton wick.

I've just tried it with my kick and it fires but then immediately cuts out.

Has anyone got any suggestions to get it working?

The thing looks fabulous on my Nemesis but it really needs the Kick functioning to get the vape consistent.

(Note all apparatus used is Chinese - Mod, atty and kick.  All rip offs, so I probably deserve some trouble)

[kirrielad]

Might be a short and the kick is cutting out for protection? Have you another regulated device to try it on? Vamo ect?

[Pezz]

It's working fine on my SVD and works on the Neme without the Kick.

It's a really tight fit inside the tube so I don't think that connectivity is a problem.

[markm]

How clean is the inside of the tube, the kick also has low
Voltage protection so how much charge has the battery,
They can also refuse to play with some protected batteries.

[markm]

If you wanted to know what the kick would vape like at 10watts
Then wrap a 1.5ohm coil, when your battery is passing 3.9v under load then
It's kicking out 10w.

[Deleted]

what batteries are you using?

[Pezz]

Oct 19, 2013 23:49:00 GMT digiw0rx said:

what batteries are you using?

Brand new Efest 18500's.

Also tried with AW IMR 18350's.

[Deleted]

Oct 20, 2013 9:43:49 GMT Pezz said:

Oct 19, 2013 23:49:00 GMT digiw0rx said:

what batteries are you using?

Brand new Efest 18500's.

Also tried with AW IMR 18350's.

At full charge?

Contacts clean on kick?

is the battery rattling?

[marcopando]

ive just recently got the fogger v2 - had problems with the device shorting - needed to fully insulate the positive pin on the 510 connection - if you havent done that already...