Kick Choice

[gayhalo]

Vape mail arrived. First the flat top unprotected 18350 batteries are the right length to fit the kick in with one extension. The slot in the plastic liner is wide enough and the plastic is thin enough for the negative pin to touch the case. I cut a piece of thick aluminium foil to go in the battery compartment first as the button on top if the kick made permenant contact with the switch. So aluminium disk then kick next. I put the kick slightly in then rotated it until the little ball clicked into the groove in the plastic liner. Next battery plus end first, then the extension and finally the original screw base. It works. I will return here when I have had a chance to play for a while and try out different settings.

[chrisjw]

Well done gayhalo......I've just put a pic up on another thread of mine......I actually took an extra mm off the length of the plastic inner sleeve & then fit the kick.....well chuffed

[gayhalo]

I had a small problem. The aluminium foil was not strong enough to I have changed to steel. I decided that copper was the best conductor but the kick will take care of any extra resistance.... That's what it does.
Vaping now at 7.5 w with my IClears30s and there is tons of vapor..... Nice to know I don't need all 10w and I can turn it down if I drown in vapor.