Kick Choice

[chrisjw]

Are there any major advantages of choosing an evolve kick over a segelei?

[Super-Shiny]

Not 100% sure but i think the Evolve fits everything and any others out there can have problems with certain mods.

[chrisjw]

Nov 2, 2013 19:56:26 GMT Super-Shiny said:

Not 100% sure but i think the Evolve fits everything and any others out there can have problems with certain mods.

Yeah, I had that problem fitting a Segelei one to the FT Nemesis, but it was easily overcome with a little bit of filing......it's just that I'm about to order a small thing from a vendor & to make it worth the postage, I was going to add a Segelei kick to it.

[jordan]

the evolve seems to have a better quality control. other kicks seem to vary in size and may not fit in certain mods without sanding it down slightly

[Super-Shiny]

Bite the bullet and get a Evolv, atleast you will know it will work.

EDIT: I have learned my lesson on scrimping on something

[blakey]

The evolve kick delivers power in a similar fashion to the provari in that it's a smooth flat signal, no pulsing unlike the cheap clones.
Also the kick2 can handle sub ohm vaping and its buid quality is far superior to the cheap clones. I have the clones here but I rarely bother with them TBH
You really do get what you pay for mate

[Balllsy]

Get kick2 Chris it has 2 pins for the mod wall so better. Also goes from 5w to 15w

[chrisjw]

Nov 2, 2013 21:39:39 GMT Balllsy said:

Get kick2 Chris it has 2 pins for the mod wall so better. Also goes from 5w to 15w

What are the pins for?............is it to make a snug fit?

[Super-Shiny]

Nov 2, 2013 21:42:36 GMT chrisjw said:

Nov 2, 2013 21:39:39 GMT Balllsy said:

Get kick2 Chris it has 2 pins for the mod wall so better. Also goes from 5w to 15w

What are the pins for?............is it to make a snug fit?

Better connection i think

[chrisjw]

Nov 2, 2013 21:59:09 GMT Super-Shiny said:

Nov 2, 2013 21:42:36 GMT chrisjw said:

What are the pins for?............is it to make a snug fit?

Better connection i think

The reason I ask, I've just looked inside my smok e-pipe & it appears to have a plastic/delrin sleeve from top to bottom.......if thats the case, then the pins wouldn't be against metal.

[Perpetua]

Nov 2, 2013 21:59:09 GMT Super-Shiny said:

Nov 2, 2013 21:42:36 GMT chrisjw said:

What are the pins for?............is it to make a snug fit?

Better connection i think

It is Rom.

Plus it's a little easier to change the wattage on the Evolv as the settings are marked, whereas they're not on the Segelei  . . .

[Balllsy]

Its to earth the kick, if it doesn't connect to the side I don't think it will work Chris.

[chrisjw]

Nov 2, 2013 22:22:18 GMT Balllsy said:

Its to earth the kick, if it doesn't connect to the side I don't think it will work Chris.

That's what I thought it would mean..........

[blakey]

Nov 2, 2013 22:24:55 GMT chrisjw said:

Nov 2, 2013 22:22:18 GMT Balllsy said:

Its to earth the kick, if it doesn't connect to the side I don't think it will work Chris.

That's what I thought it would mean..........

Run some copper tape from the battery spring up to where the kick will fit and you'll have your negative connection- that's what I did with my V-mods which are plastic inside. Works a treat

[chrisjw]

Nov 3, 2013 6:49:10 GMT blakey said:

Nov 2, 2013 22:24:55 GMT chrisjw said:

That's what I thought it would mean..........

Run some copper tape from the battery spring up to where the kick will fit and you'll have your negative connection- that's what I did with my V-mods which are plastic inside. Works a treat

This stuff?


www.ebay.co.uk/itm/EMI-COPPER-FOIL-SHIELDING-TAPE-SELF-ADHESIVE-/390686022776?pt=UK_Sound_Vision_Other&hash=item5af6b39c78