Cas
Junior Member
Joined:August 2013
Posts: 65
Location:
Likes: 30
Recent Posts
Last Online Oct 18, 2014 21:35:24 GMT
|
Post by Cas on Nov 5, 2013 18:55:45 GMT
Ok, so i ordered the mother in law a few of the EVOD clearomisers from fasttech, all 4 working great until the other half decided to unscrew one from the battery and accidentaly unscrewed the actual clearomiser....lol Obviously, juice came out and she quickly screwed t back together, but sadly the thing has stopped working.. What now? should i clean the whole thing and leave it to dry then re-fill? or s the head gone for good & will need replacing? I have turned it upside down and unscrewed the bottom and dried all of that and popped it back in Thanks!
|
|
Super-Shiny
Super Member
SUSPENDED
Joined:January 2013
Posts: 13,131
Location:
Likes: 10,308
Recent Posts
Last Online Nov 25, 2014 19:31:22 GMT
|
Post by Super-Shiny on Nov 5, 2013 18:59:04 GMT
Strip it down and give it a good clean and then dry completely and start again.
|
|
Cas
Junior Member
Joined:August 2013
Posts: 65
Location:
Likes: 30
Recent Posts
Last Online Oct 18, 2014 21:35:24 GMT
|
Post by Cas on Nov 5, 2013 19:07:53 GMT
have stripped it and also removed the thing what resembles a screw at the buttom.. there appears to be a metal wire dangling out of that bit, is that supposed to go back through the tiny hole in the screw? lol hope this makes sense
|
|
Super-Shiny
Super Member
SUSPENDED
Joined:January 2013
Posts: 13,131
Location:
Likes: 10,308
Recent Posts
Last Online Nov 25, 2014 19:31:22 GMT
|
Post by Super-Shiny on Nov 5, 2013 19:10:47 GMT
have stripped it and also removed the thing what resembles a screw at the buttom.. there appears to be a metal wire dangling out of that bit, is that supposed to go back through the tiny hole in the screw? lol hope this makes sense Should of left that in place, put the silver pin back in trying to make sure the wire is on the outside of it, so it's touching the inside of the rubber grommet. If you have a device that can show resistances i would test it before using it as if it ain't done right it can damage your battery.
|
|
Cas
Junior Member
Joined:August 2013
Posts: 65
Location:
Likes: 30
Recent Posts
Last Online Oct 18, 2014 21:35:24 GMT
|
Post by Cas on Nov 5, 2013 21:05:27 GMT
Thanks for the help romlee..only standard batteries but new heads are coming anyway so will toss that one and remember not to take that out
|
|
Super-Shiny
Super Member
SUSPENDED
Joined:January 2013
Posts: 13,131
Location:
Likes: 10,308
Recent Posts
Last Online Nov 25, 2014 19:31:22 GMT
|
Post by Super-Shiny on Nov 5, 2013 21:06:46 GMT
Thanks for the help romlee..only standard batteries but new heads are coming anyway so will toss that one and remember not to take that out Yep, if you have nothing to test the head on better to throw it. Better to be safe than sorry
|
|
Cas
Junior Member
Joined:August 2013
Posts: 65
Location:
Likes: 30
Recent Posts
Last Online Oct 18, 2014 21:35:24 GMT
|
Post by Cas on Nov 7, 2013 13:40:14 GMT
Thanks for the help romlee..only standard batteries but new heads are coming anyway so will toss that one and remember not to take that out Yep, if you have nothing to test the head on better to throw it. Better to be safe than sorry Definitely, the heads are far cheaper than the batteries lol thanks for the advice
|
|