Teenie tiny screws

[Pezz]

Does anyone know where I can get some tiny philips head screws to replace the awful grub screws you get in atomizers?

I think they are m2 x 0.4 if that helps.

Thanks

[Brambles]

Ebay is a good place to start.

Just picked 1st reasonable seller I found. ebay link

I find hex socket head (allen screws) much better and often replacing the cheap ones which are badly made and getting a decent allen key is a better option than pozi drive ones. Much easier to put them back in and assemble.

Search ebay for m2 x 4 screws. I assume you meant 4 and not 0.4 .

[izan]

Often the grubs are used to keep the height limited to the tops of the posts.
When shopping for replacements, consider the screw head could add a mm or so to the post height.
Some top caps WILL NOT fit and will hard short.
Measure twice, buy once.

Good luck

[mart166]

Try www.quicktest.co.uk they do tubs of small screws, or google cousins watch supplies, they also do various small screws.



MP

[Brambles]

Pezz, If you get better quality grub screws and again as I said a better quality allen key then you will find them much easier to use. The hex will fit the key better and not be so sloppy.

izan makes a very good pint about the heads shorting to the cover.

[dakgm]

I use these

www.stealthvape.co.uk/rebuildable-supplies/screws-of-destiny

But you have to check you have the room for them