PANIC! Just killed my iclear30

[Pepperty]

help.............

3rd refill, just wrenched top off my iclear 30, to fill - as I did 2x before and pulled plastic header off the coil thingie? and now am holding a random piece of string in my hand?

So does anyone have a rescue video for fixing>? bearing in mind I'm hammering the Christmas spirits...so complicated = I cant do!

[jaysey]

Dec 27, 2013 21:25:40 GMT Pepperty said:

help.............

3rd refill, just wrenched top off my iclear 30, to fill - as I did 2x before and pulled plastic header off the coil thingie? and now am holding a random piece of string in my hand?

So does anyone have a rescue video for fixing>? bearing in mind I'm hammering the Christmas spirits...so complicated = I cant do!

Oh dear pep ! Sorry for the like but your posts do make giggle
Can't help but I'm sure some one will soon

[Pepperty]

SHIT! THIS RANDOM LONG BIT OF ROPE? CANT SEE WHERE THE HELL IT FITS......................

[Pepperty]

*PALPITATIONS* i have 1 hour max before man comes home...i have to seem cool and casual and completely sorted about 'vaping'
meanwhile - theres random bits of iclear 30 head all over my back room?!?!? its an illogical jigsaw

[Deleted]

Calm down & have another drink, whilst waiting for Super-Shiny or someone that knows to wander in & reply. As sadly, I've never seen an i30 to offer any help.
It did make me giggle too though, sorry. Hope you get it sorted.

[jaysey]

Must have come the tube that houses it but not sure if it will go back in ? It will need rethreading through the coil ? Don't think it can be done sober never Mind hammered ! Have you a spare ?

[tmg]

Oh @pep, I have no constructive help to offer, just commiserations and to admit that I too am giggling at your entertaining posts. I do hope you have a backup clearomiser...?

[keepitgoin]

The Rubber Cap thingy is meant to come off, put it back on, without the spare bit of string, turn down your Voltage/Wattage and its a Single Coil Device, Vape for a bit, read some more advice and check out where to get replacement coils. In the top of the iClear, under the Rubber Cap, there are Slits, the bit of wick fits in there, so it hangs out equally onboth sides, but I think you may have broken the wick away from the coil!!

[jaysey]

Oh thought it was the 30s that came with vtr ? Is it a normal 30 ? Sorry Hun still can't help ! Hurry up Shiny

[loobiebloo]

Deep breaths, slowly. You must have a back up, Pepperty - put all the bits in a bag, put it out of sight and use a standby till you have time to deal with your disaster calmly and sensibly (and have got the answer from someone here).

[keepitgoin]

@pep, I've some spares sitting in front of me and I'd drop 'em off if you were closer!!

[Perpetua]

Is it a 30 or a 30s Pep . . . . here's PBusardo's review of the 30:





It sounds like you've pulled the wick out of the coil . . .  did you not get some spare heads with it? They screw in and out of the top central post housing.

[fiddles]

If you have pulled the wicks out you got no chance of putting them back in. You need to unscrew head & replace (iclears not yours )

[keepitgoin]

DONT TRY AND RECOIL IT IF YOU ARE A BIT SQUIFFY!!!!!!!!!!!!

[boyofford]

drink + refill can end bad!

Less of a problem but after many glasses of Port yesterday went to swap a iclear16s on my shinny new MVP2 and accidentally unscrewed the top from the base! eliquid went everywhere, had a panic cleaning it up as was worried might break the MVP2 whilst the mrs was more worried about the bed, where I was sat when did this!!!