Squape Clone

[alanjana]

Wanted - Squape clone - can't find one anywhere.

Alan

[Deleted]

Here you go alanjana s456752653.e-shop.info/shop/article_576/The-SQuape-Clone-RBA-stainless-steel--...html?shop_param=cid%3D41%26aid%3D576%26

[Deleted]

Emetal and a pyrex tank. Though 42 notes, still a lot cheaper than what I paid for the real thing. Is it any good?

Any idea where to get the pyrex glass tank from?

[Deleted]

Jan 19, 2014 17:28:12 GMT @zero said:

Emetal and a pyrex tank. Though 42 notes, still a lot cheaper than what I paid for the real thing. Is it any good?

Any idea where to get the pyrex glass tank from?

The pyrex tank is $h1t mate  ... not airtight  ...  I have ordered the full SS tank from C9V

I fixed my pyrex tank problem with a touch of waterproof silicon sealant around the top and bottom of the glass and it has made it airtight  ... several tankfuls through it and no loss of vacuum or leaks.  Other than the crappy pyrex tank sealing issue, everything else is spot on and it gives a terrific vape with a micro coil and cotton set up and refilling is the dead simple evod fashion.

[richo71]

Seen this on the web somewhere cant remember where, take the o rings off wrap some threads of cotton around the atty o ring channels put o rings back on and your sorted, apparently

[gaz0012]

Jan 19, 2014 16:46:53 GMT alanjana said:

Wanted - Squape clone - can't find one anywhere.

Alan

Got one here not doing anything £28 all inc ?

[alanjana]

There seems to be 2 types of squape clone.

Is it the one with red o-rings and 2 drip tips or the other one?

Does it come with spare o-rings, etc.

Alan

[Deleted]

Jan 20, 2014 4:31:20 GMT alanjana said:

There seems to be 2 types of squape clone.

Is it the one with red o-rings and 2 drip tips or the other one?

Does it come with spare o-rings, etc.

Alan

Are you sure that you aren't thinking of the AQUA?

[Deleted]

Jan 19, 2014 19:41:34 GMT richo71 said:

Seen this on the web somewhere cant remember where, take the o rings off wrap some threads of cotton around the atty o ring channels put o rings back on and your sorted, apparently

Although the silicon fix seems to be holding, I have ordered the optional full stainless steel outer tank from C9V as I wouldn't be sure that my fixed pyrex or even the original PMMA inner tank would remain airtight in the long run. Don't get me wrong, the pyrex inner tank is not rattling around inside the steel outer but it can be moved a little more easily than the PMMA of the original ...  just enough slack to loose the vacuum when the juice level drops below half way and thus cause leaking. The full SS tank will do away with the windows/inner tank interface and will be guaranteed airtight.

[Deleted]

When I got my squape from C9V I ordered the SS top at the same time. Glad I did now! Cheers.

[Deleted]

Jan 20, 2014 7:39:43 GMT @zero said:

When I got my squape from C9V I ordered the SS top at the same time. Glad I did now! Cheers.

Have you had any problems concerning airtightness with the PMMA inner tank in your original Squape? ... I'm not sure if the problem with the clone is the pyrex tank itself or the O rings but the full SS tank should solve the problem whatever the cause.

[Deleted]

I've only used the Stainless because I was using a citrus when I first used it. I haven't used it enough to be honest. First time I put a coil and wick in I got a mouthful because the coils weren't right up to the edge of the slots LOL. (and they say its fool proof!!) The second time was fine. There is an interesting thread on C9V forum about the squape. Someone in there changed the plastic to pyrex successfully and mentions some German youtube video.

www.c9v-forum.com/stock-updates-discounts-contests/the-squape-atomiser-by-stattqualm/30/

As you know, not cheap but deffo a keeper as they say.

[Deleted]

Jan 20, 2014 8:11:58 GMT @zero said:

I've only used the Stainless because I was using a citrus when I first used it. I haven't used it enough to be honest. First time I put a coil and wick in I got a mouthful because the coils weren't right up to the edge of the slots LOL. (and they say its fool proof!!) The second time was fine. There is an interesting thread on C9V forum about the squape. Someone in there changed the plastic to pyrex successfully and mentions some German youtube video.

www.c9v-forum.com/stock-updates-discounts-contests/the-squape-atomiser-by-stattqualm/30/

As you know, not cheap but deffo a keeper as they say.

Thanks for that mate  .... had a look and the replacement pyrex tank that SKP574 got from Germany (page 5) is totally different from the clone pyrex tank in that the clone pyrex is totally smooth and doesn't have the ridge around the middle so perhaps the PMMA tank would be a better option in the clone.

[alanjana]

Jan 20, 2014 6:52:20 GMT @freefromsmoking said:

Jan 20, 2014 4:31:20 GMT alanjana said:

There seems to be 2 types of squape clone.

Is it the one with red o-rings and 2 drip tips or the other one?

Does it come with spare o-rings, etc.

Alan

Are you sure that you aren't thinking of the AQUA?

My mistake. oops.

Alan