Mini protank v2

[law]

So I have used this for the first time today and I have noticed that the juice I have been smoking in the ce4 style tanks now seems very harsh ? Is this normal ? The coils that came in the pack with the protank are 2.2 's , would 1.8s work better ? Or make a difference ? I have made my first error with it when I went to fill it , I had screwed it to my battery abit too tight and ended up unscrewing the tank part and having a hand full of ejuice *facepalm*
My next step is a vv battery but and vision spinner I can buy from my local vape stall or order a itaste for 29.99 with the iclear tanks . I can get the spinner tomorrow but will have to wait till after weekend for itaste . Will I have to bear in mind the coil used in the protank with a vv ? It came with a card with the protank that says not to go over a certain coil .
And finally last question , it's a lot heavier !! Can I get some plastic mouth pieces ? If so what ones would fit the mini protank ?
Thanks in advance

[keepitgoin]

The iTaste would be a better buy in the long run, dont worry about oHms just yet, get a Mix of 2.2 and 1.8 if you are worried, it will be even heavier with an iTaste, you'll get used to the weight, wait til you hold a VTR+Battery+3mljuice+extender to fit different tanks!!!

[Steve (VapeStorm)]

Jan 30, 2014 0:23:02 GMT keepitgoin said:

The iTaste would be a better buy in the long run, dont worry about oHms just yet, get a Mix of 2.2 and 1.8 if you are worried, it will be even heavier with an iTaste, you'll get used to the weight, wait til you hold a VTR+Battery+3mljuice+extender to fit different tanks!!!

This I can vouch for lol It weighs a ton but so worth it :)

[law]

No worries I shall wait till I'm back home Sunday any ideas on changing the mouthpiece then ? My other half has found the same with the protank being abit heavier .

And any reason why my juice that wasn't so harsh before , now seems it on the protank ? Seems a lot drier if that makes sense

[Deleted]

Welcome to the wonderful world of Kanger Tech where unscrewing a tank from a battery more often than not = juice on hands/lap/shoes/floor!

The lower the ohms of your atomiser the harsher the juice becomes - the resistance (ohms) of a ce4 is usually quite high 2.7 - 3.0. If a juice tastes harsh in a 2.2 protank it generally means its pretty rotten juice.

Probably not a great idea to buy a spinner from a stall unless you can guarantee that it is a genuine Vision product.

[Brambles]

Unscrew the tank a little bit until you get a bubble or two rising then try the vape again and see if it is better. If it is better then you need to remove some of teh wicking material - the flavour wicks as they are called which sit on top of the coil. Remove the tube on the atomiser along with the rubber seal, Lift out a bit of wicking material an reassemble and try it again. Make sure the little tube is pressed well home. Keep the wick safe as you may need to put some of it back in if you then get gurgling a lot especially as the tank is nearly empty. Hope this all makes sense to you.

[lairey]

law, if you order from myepack.co.uk, you can choose next day delivery if you're really desperate

[tominmids]

Jan 30, 2014 3:14:38 GMT lairey said:

law, if you order from myepack.co.uk, you can choose next day delivery if you're really desperate

Even with regular delivery myepack are very quick. I usually get delivery by the next day 
I once had an order arrive 19 hours after I hit the buy now button. I think Ash processes his orders very quickly.

[martintheveg]

Hi Law, I only started vaping last Thursday and have had difficulties with these tank threads already, being an aero modeller I am used to very tightly screwing up nuts on small petrol and diesel engines and had to learn very quickly to be very subtle with all my tanks. What works for me is having in my collection of tools a 1 litre bottle of very light sewing machine oil which I purchased from a sewing machine store, it only cost £4 for the litre and will probably last you for the rest of your days, God willing.
You can use any small implement to gently put the oil on the threads, I use a wooden tooth pick, then I just tighten up until I can just feel the pieces bite.
Hope this helps.

[aquila]

I have been vaping foe a while now  & used the aero tank but bought the mini pro tank today, have vaped the crap out of it since getting it  love it, if you are using a non variable battery, volts, amps etc i strongly suggest you invest in a mod i have the vamo 3  and a itaste vv, its completely changed the vaping experiance, more teast and more vapour, this maybe the problem, you don't have control over the vapeing hit and flaovour, but on a previous post it was mentioned about the quality of the e juice, this could also be the problem, i have had some issues with juice and now use a local shop to ensure a quality product, also tried vape apes products also a good souce but its like everything these days a bargain isn't always so, don't give up the vapeing it's the answer to our addiction, sorry i'm rambling