HELP!

[VapeKingMikes]

I'm letting it stand for 20mins so coil can wet

[VapeKingMikes]

I usually prime my tanks... But I jus watched a YouTube vide that says don't prime protanks? Is this where I gone wrong?

[poochops]

What's your voltage set at mate? I'd be using about 4.5-4.7 and getting a good amount of vapour of a protank 1

[VapeKingMikes]

I was adjusting the watts.... I've had it from 6watts all the way to 11 and same vapour... If I adjust volts instead of watts will that make a difference?

[VE Jason]

If you're getting bubbles coming up on every draw, with every tank/clearomiser - it's an airflow issue.

1st thing to do is loosen the tank/clearomiser off by 1/4 turn so that it still fires, but allows more air in.

[poochops]

Feb 1, 2014 21:42:01 GMT VapeKingMikes said:

I was adjusting the watts.... I've had it from 6watts all the way to 11 and same vapour... If I adjust volts instead of watts will that make a difference?

Sorry, you're ahead of me, no it won't make a difference, about 10 watts or about 4.5 4.7 volts, either/or.

sounds like the head is over wicking and saturating the coil, are you getting gurgling and or juice in your mouth?

[poochops]

Feb 1, 2014 21:42:21 GMT VE Jason said:

If you're getting bubbles coming up on every draw, with every tank/clearomiser - it's an airflow issue.

1st thing to do is loosen the tank/clearomiser off by 1/4 turn so that it still fires, but allows more air in.

Good idea.

[VapeKingMikes]

Feb 1, 2014 21:42:21 GMT VE Jason said:

If you're getting bubbles coming up on every draw, with every tank/clearomiser - it's an airflow issue.

1st thing to do is loosen the tank/clearomiser off by 1/4 turn so that it still fires, but allows more air in.

Ok I will try that... 

[VapeKingMikes]

Feb 1, 2014 21:42:21 GMT VE Jason said:

If you're getting bubbles coming up on every draw, with every tank/clearomiser - it's an airflow issue.

1st thing to do is loosen the tank/clearomiser off by 1/4 turn so that it still fires, but allows more air in.

If that doesn't work what's the next thing I can try?

[VapeKingMikes]

Feb 1, 2014 21:44:35 GMT poochops said:

Feb 1, 2014 21:42:01 GMT VapeKingMikes said:

I was adjusting the watts.... I've had it from 6watts all the way to 11 and same vapour... If I adjust volts instead of watts will that make a difference?

Sorry, you're ahead of me, no it won't make a difference, about 10 watts or about 4.5 4.7 volts, either/or.

sounds like the head is over wicking and saturating the coil, are you getting gurgling and or juice in your mouth?

Yes gurgling but no juice

[VE Jason]

If that doesn't work - it gets a bit more complicated.

If it was just one tank/clearomiser - I would just say -dud head- try another.

But, if it's everything you put on it - then you've got to look at the device rather than the liquid carrier.

See how you go - but, take it easy and take long slow draws rather than trying to suck an elephant through a straw (if you know what I mean).

[poochops]

I still think it's over wicking then. Do you make your own coils? A bit more wick on top should help, and don't prime it just let it soak for a few minutes. If you don't make your own try a fresh head without priming, you don't need to empty the remaining juice obvs.

[VapeKingMikes]

Feb 1, 2014 21:52:38 GMT VE Jason said:

If that doesn't work - it gets a bit more complicated.

If it was just one tank/clearomiser - I would just say -dud head- try another.

But, if it's everything you put on it - then you've got to look at the device rather than the liquid carrier.

See how you go - but, take it easy and take long slow draws rather than trying to suck an elephant through a straw (if you know what I mean).

It must be me doing something wrong cos I've tired few ego battieres and now an MVP and its always the same problem... I bet its something so simple but I can't figure out what

[poochops]

Feb 1, 2014 21:52:38 GMT VE Jason said:

If that doesn't work - it gets a bit more complicated.

If it was just one tank/clearomiser - I would just say -dud head- try another.

But, if it's everything you put on it - then you've got to look at the device rather than the liquid carrier.

See how you go - but, take it easy and take long slow draws rather than trying to suck an elephant through a straw (if you know what I mean).

Suck an elephant through a straw 

[VE Jason]

Feb 1, 2014 21:49:47 GMT VapeKingMikes said:

Feb 1, 2014 21:44:35 GMT poochops said:

Sorry, you're ahead of me, no it won't make a difference, about 10 watts or about 4.5 4.7 volts, either/or.

sounds like the head is over wicking and saturating the coil, are you getting gurgling and or juice in your mouth?

Yes gurgling but no juice

Definitely sounds like over tightened.

Take it off - blow through into a tissue - put it back on slightly looser