problem help!

[VapeKingMikes]

So I said yesterday my MVP isn't working. It fires then cuts short. I was using a pro tank 3 and then a mini pro tank 2. Both won't work. I then tired then both on a ego battery and the tanks anit working on them either. U will say oh its the tanks. I am doing everything correctly but they r not working. So back to the MVP I tired a ce5 clearomizer and its not working either on it. That's the first issue with the MVP. Now with the mini pro tank I'm noticing that when I put it together I've tired 5_ different coils in it but when putting it on the MVP or ego the coil comes loose. I am screwing it tight but not over tight. That's the second issue. Now the third obviously the pro tank 3 won't work on an ego so I don't know it that's bugged too but it won't work on the MVP. That's the final issue please help....... I'm losing my rag with this stuff and I'm thinking about smoking a fag as I anit had nicotine hit properly in about 4-5 days due to these issues....... What do I do???

[ukric]

Are the posts making contact?

[VapeKingMikes]

Feb 7, 2014 21:39:56 GMT ukric said:

Are the posts making contact?

I would assume so..... I've tired holding the fire button until it makes contact

[ukric]

My first port of call would be to do this...



But on the battery end. Carefully. With a paper clip.

[ionian]

Have you got skype VapeKingMikes? I'll happily have a look with you via the magic of the interwebz if you think it will help. If you do, PM me your address, get all your stuff together by the PC and I'll give you a video call, see if we can work through the problems together.

[Super-Shiny]

Sounds like the center pin has been pushed down to far, try this but be gentle and careful

[VapeKingMikes]

Feb 7, 2014 21:43:54 GMT ionian said:

Have you got skype VapeKingMikes? I'll happily have a look with you via the magic of the interwebz if you think it will help. If you do, PM me your address, get all your stuff together by the PC and I'll give you a video call, see if we can work through the problems together.

No I havent mate. I'm using a tablet to access these forum as I'm buying a new PC soon

[dickyg]

If you have an MVP v2, screw on the tank then press the two side buttons at the same time. If it read A and then two digits (A2.1 for example) then the tank is making contact with the MVP. If it reads NON then it won't be and you might want to try pulling the centre pin up gently on the MVP.

[ionian]

Feb 7, 2014 21:45:17 GMT VapeKingMikes said:

Feb 7, 2014 21:43:54 GMT ionian said:

Have you got skype VapeKingMikes? I'll happily have a look with you via the magic of the interwebz if you think it will help. If you do, PM me your address, get all your stuff together by the PC and I'll give you a video call, see if we can work through the problems together.

No I havent mate. I'm using a tablet to access these forum as I'm buying a new PC soon

No problems. Try the above suggestions - this would have been where I would have started anyway

with a atty connected, hold down both buttons on the MVP and see if you get a resistance reading. If it says NON, either the battery connection has been pushed down too far or you need to tweak the post on the coil head. 

Edit - crossed posts with dickyg - great minds and all that

[VapeKingMikes]

Feb 7, 2014 21:48:52 GMT ionian said:

Feb 7, 2014 21:45:17 GMT VapeKingMikes said:

No I havent mate. I'm using a tablet to access these forum as I'm buying a new PC soon

No problems. Try the above suggestions - this would have been where I would have started anyway

with a atty connected, hold down both buttons on the MVP and see if you get a resistance reading. If it says NON, either the battery connection has been pushed down too far or you need to tweak the post on the coil head. 

Edit - crossed posts with dickyg - great minds and all that

It reads the ohms fine.... It don't say non

[VapeKingMikes]

Feb 7, 2014 21:46:15 GMT dickyg said:

If you have an MVP v2, screw on the tank then press the two side buttons at the same time. If it read A and then two digits (A2.1 for example) then the tank is making contact with the MVP. If it reads NON then it won't be and you might want to try pulling the centre pin up gently on the MVP.

Yes it gives a reading..... It dong say NON

[ionian]

When it cuts out after 3 seconds, does the green light go out?
I'm sure it is, but is it fully charged?
Without wishing to channel every IT department out there, have you tried turning it off (3 clicks), count to 15, and then turn on again?

Did you speak to Ash at myepack today? If the unit is defective, I'm sure he'll exchange it.

[VapeKingMikes]

Feb 7, 2014 22:00:55 GMT ionian said:

When it cuts out after 3 seconds, does the green light go out?
I'm sure it is, but is it fully charged?
Without wishing to channel every IT department out there, have you tried turning it off (3 clicks), count to 15, and then turn on again?

Did you speak to Ash at myepack today? If the unit is defective, I'm sure he'll exchange it.

No green light still stays on.... Yes I've tired that mate... I've emailed 3times in the past 2days but no response

[VapeKingMikes]

I've tired as the videos say.... But nothing changes....

[ukric]

Hmmm, well if it's giving an ohm reading then it must be making contact.

What ohm reading is it giving?